# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung ExynosAuto v920 SoC clock controller

maintainers:
  - Sunyeal Hong <sunyeal.hong@samsung.com>
  - Chanwoo Choi <cw00.choi@samsung.com>
  - Krzysztof Kozlowski <krzk@kernel.org>
  - Sylwester Nawrocki <s.nawrocki@samsung.com>

description: |
  ExynosAuto v920 clock controller is comprised of several CMU units, generating
  clocks for different domains. Those CMU units are modeled as separate device
  tree nodes, and might depend on each other. Root clocks in that clock tree are
  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
  The external OSCCLK must be defined as fixed-rate clock in dts.
 
  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
  dividers; all other clocks of function blocks (other CMUs) are usually
  derived from CMU_TOP.
 
  Each clock is assigned an identifier and client nodes can use this identifier
  to specify the clock which they consume. All clocks available for usage
  in clock consumer nodes are defined as preprocessor macros in
  'include/dt-bindings/clock/samsung,exynosautov920.h' header.

properties:
  compatible:
    enum:
      - samsung,exynosautov920-cmu-top
      - samsung,exynosautov920-cmu-peric0
      - samsung,exynosautov920-cmu-peric1
      - samsung,exynosautov920-cmu-misc
      - samsung,exynosautov920-cmu-hsi0
      - samsung,exynosautov920-cmu-hsi1

  clocks:
    minItems: 1
    maxItems: 4

  clock-names:
    minItems: 1
    maxItems: 4
 
  "#clock-cells":
    const: 1

  reg:
    maxItems: 1

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynosautov920-cmu-top

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (38.4 MHz)

        clock-names:
          items:
            - const: oscclk

  - if:
      properties:
        compatible:
          contains:
            enum:
              - samsung,exynosautov920-cmu-peric0
              - samsung,exynosautov920-cmu-peric1

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (38.4 MHz)
            - description: CMU_PERICn NOC clock (from CMU_TOP)
            - description: CMU_PERICn IP clock (from CMU_TOP)

        clock-names:
          items:
            - const: oscclk
            - const: noc
            - const: ip

  - if:
      properties:
        compatible:
          enum:
            - samsung,exynosautov920-cmu-misc
            - samsung,exynosautov920-cmu-hsi0

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (38.4 MHz)
            - description: CMU_MISC/CMU_HSI0 NOC clock (from CMU_TOP)

        clock-names:
          items:
            - const: oscclk
            - const: noc

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynosautov920-cmu-hsi1

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (38.4 MHz)
            - description: CMU_HSI1 NOC clock (from CMU_TOP)
            - description: CMU_HSI1 USBDRD clock (from CMU_TOP)
            - description: CMU_HSI1 MMC_CARD clock (from CMU_TOP)

        clock-names:
          items:
            - const: oscclk
            - const: noc
            - const: usbdrd
            - const: mmc_card

required:
  - compatible
  - "#clock-cells"
  - clocks
  - clock-names
  - reg

additionalProperties: false

examples:
  # Clock controller node for CMU_PERIC0
  - |
    #include <dt-bindings/clock/samsung,exynosautov920.h>
 
    cmu_peric0: clock-controller@10800000 {
        compatible = "samsung,exynosautov920-cmu-peric0";
        reg = <0x10800000 0x8000>;
        #clock-cells = <1>;
 
        clocks = <&xtcxo>,
                 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
                 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
        clock-names = "oscclk",
                      "noc",
                      "ip";
    };

...