# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ST-Ericsson DB8500 (U8500) clocks

maintainers:
  - Ulf Hansson <ulf.hansson@linaro.org>
  - Linus Walleij <linus.walleij@linaro.org>

description: While named "U8500 clocks" these clocks are inside the
  DB8500 digital baseband system-on-chip and its siblings such as
  DB8520. These bindings consider the clocks present in the SoC
  itself, not off-chip clocks. There are four different on-chip
  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
  control management unit) clocks and PRCC (peripheral reset and
  clock controller) clocks. For some reason PRCC 4 does not exist so
  the itemization can be a bit unintuitive.

properties:
  compatible:
    enum:
      - stericsson,u8500-clks
      - stericsson,u8540-clks
      - stericsson,u9540-clks

  reg:
    items:
      - description: PRCC 1 register area
      - description: PRCC 2 register area
      - description: PRCC 3 register area
      - description: PRCC 5 register area
      - description: PRCC 6 register area

  prcmu-clock:
    description: A subnode with one clock cell for PRCMU (power, reset, control
      management unit) clocks. The cell indicates which PRCMU clock in the
      prcmu-clock node the consumer wants to use.
    type: object

    properties:
      '#clock-cells':
        const: 1

    additionalProperties: false

  prcc-periph-clock:
    description: A subnode with two clock cells for PRCC (peripheral
      reset and clock controller) peripheral clocks. The first cell indicates
      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
      5, 6. The second cell indicates which clock inside the PRCC block it
      wants, possible values are 0 thru 31.
    type: object

    properties:
      '#clock-cells':
        const: 2

    additionalProperties: false

  prcc-kernel-clock:
    description: A subnode with two clock cells for PRCC (peripheral reset
      and clock controller) kernel clocks. The first cell indicates which PRCC
      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
      second cell indicates which clock inside the PRCC block it wants, possible
      values are 0 thru 31.
    type: object

    properties:
      '#clock-cells':
        const: 2

    additionalProperties: false

  prcc-reset-controller:
    description: A subnode with two reset cells for the reset portions of the
      PRCC (peripheral reset and clock controller). The first cell indicates
      which PRCC block the consumer wants to use, possible values are 1, 2, 3
      5 and 6. The second cell indicates which reset line inside the PRCC block
      it wants to control, possible values are 0 thru 31.
    type: object

    properties:
      '#reset-cells':
        const: 2

    additionalProperties: false

  rtc32k-clock:
    description: A subnode with zero clock cells for the 32kHz RTC clock.
    type: object

    properties:
      '#clock-cells':
        const: 0

    additionalProperties: false

  smp-twd-clock:
    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
      clock cells.
    type: object

    properties:
      '#clock-cells':
        const: 0

    additionalProperties: false

  clkout-clock:
    description: A subnode with three clock cells for externally routed clocks,
      output clocks. These are two PRCMU-internal clocks that can be divided and
      muxed out on the pads of the DB8500 SoC.
    type: object

    properties:
      '#clock-cells':
        description:
          The first cell indicates which output clock we are using,
          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
          The second cell indicates which clock we want to use as source,
          possible values are 0 thru 7, see the defines for the different
          source clocks.
          The third cell is a divider, legal values are 1 thru 63.
        const: 3

    additionalProperties: false

required:
  - compatible
  - reg
  - prcmu-clock
  - prcc-periph-clock
  - prcc-kernel-clock
  - rtc32k-clock
  - smp-twd-clock

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/ste-db8500-clkout.h>
    clocks@8012 {
      compatible = "stericsson,u8500-clks";
      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
            <0xa03cf000 0x1000>;
 
      prcmu_clk: prcmu-clock {
        #clock-cells = <1>;
      };
 
      prcc_pclk: prcc-periph-clock {
        #clock-cells = <2>;
      };
 
      prcc_kclk: prcc-kernel-clock {
        #clock-cells = <2>;
      };
 
      prcc_reset: prcc-reset-controller {
        #reset-cells = <2>;
      };
 
      rtc_clk: rtc32k-clock {
        #clock-cells = <0>;
      };
 
      smp_twd_clk: smp-twd-clock {
        #clock-cells = <0>;
      };
 
      clkout_clk: clkout-clock {
        #clock-cells = <3>;
      };
    };