Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos Auto v9 SoC clock controller maintainers: - Chanho Park <chanho61.park@samsung.com> - Chanwoo Choi <cw00.choi@samsung.com> - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> description: | Exynos Auto v9 clock controller is comprised of several CMU units, generating clocks for different domains. Those CMU units are modeled as separate device tree nodes, and might depend on each other. Root clocks in that clock tree are two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). The external OSCCLK must be defined as fixed-rate clock in dts. CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and dividers; all other clocks of function blocks (other CMUs) are usually derived from CMU_TOP. Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All clocks available for usage in clock consumer nodes are defined as preprocessor macros in 'include/dt-bindings/clock/samsung,exynosautov9.h' header. properties: compatible: enum: - samsung,exynosautov9-cmu-top - samsung,exynosautov9-cmu-busmc - samsung,exynosautov9-cmu-core - samsung,exynosautov9-cmu-fsys0 - samsung,exynosautov9-cmu-fsys1 - samsung,exynosautov9-cmu-fsys2 - samsung,exynosautov9-cmu-peric0 - samsung,exynosautov9-cmu-peric1 - samsung,exynosautov9-cmu-peris clocks: minItems: 1 maxItems: 5 clock-names: minItems: 1 maxItems: 5 "#clock-cells": const: 1 reg: maxItems: 1 allOf: - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-top then: properties: clocks: items: - description: External reference clock (26 MHz) clock-names: items: - const: oscclk - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-busmc then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_BUSMC bus clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_busmc_bus - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-core then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_CORE bus clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_core_bus - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-fsys0 then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_FSYS0 bus clock (from CMU_TOP) - description: CMU_FSYS0 pcie clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_fsys0_bus - const: dout_clkcmu_fsys0_pcie - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-fsys1 then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_FSYS1 bus clock (from CMU_TOP) - description: CMU_FSYS1 mmc card clock (from CMU_TOP) - description: CMU_FSYS1 usb clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_fsys1_bus - const: gout_clkcmu_fsys1_mmc_card - const: dout_clkcmu_fsys1_usbdrd - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-fsys2 then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_FSYS2 bus clock (from CMU_TOP) - description: UFS clock (from CMU_TOP) - description: Ethernet clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_fsys2_bus - const: dout_fsys2_clkcmu_ufs_embd - const: dout_fsys2_clkcmu_ethernet - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-peric0 then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_PERIC0 bus clock (from CMU_TOP) - description: PERIC0 IP clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_peric0_bus - const: dout_clkcmu_peric0_ip - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-peric1 then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_PERIC1 bus clock (from CMU_TOP) - description: PERIC1 IP clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_peric1_bus - const: dout_clkcmu_peric1_ip - if: properties: compatible: contains: const: samsung,exynosautov9-cmu-peris then: properties: clocks: items: - description: External reference clock (26 MHz) - description: CMU_PERIS bus clock (from CMU_TOP) clock-names: items: - const: oscclk - const: dout_clkcmu_peris_bus required: - compatible - "#clock-cells" - clocks - clock-names - reg additionalProperties: false examples: # Clock controller node for CMU_FSYS2 - | #include <dt-bindings/clock/samsung,exynosautov9.h> cmu_fsys2: clock-controller@17c00000 { compatible = "samsung,exynosautov9-cmu-fsys2"; reg = <0x17c00000 0x8000>; #clock-cells = <1>; clocks = <&xtcxo>, <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; clock-names = "oscclk", "dout_clkcmu_fsys2_bus", "dout_fsys2_clkcmu_ufs_embd", "dout_fsys2_clkcmu_ethernet"; }; ... |