Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 | What: /sys/class/hwmon/hwmonX/name Description: The chip name. This should be a short, lowercase string, not containing whitespace, dashes, or the wildcard character '*'. This attribute represents the chip name. It is the only mandatory attribute. I2C devices get this attribute created automatically. RO What: /sys/class/hwmon/hwmonX/label Description: A descriptive label that allows to uniquely identify a device within the system. The contents of the label are free-form. RO What: /sys/class/hwmon/hwmonX/update_interval Description: The interval at which the chip will update readings. Unit: millisecond RW Some devices have a variable update rate or interval. This attribute can be used to change it to the desired value. What: /sys/class/hwmon/hwmonX/inY_min Description: Voltage min value. Unit: millivolt RW What: /sys/class/hwmon/hwmonX/inY_lcrit Description: Voltage critical min value. Unit: millivolt RW If voltage drops to or below this limit, the system may take drastic action such as power down or reset. At the very least, it should report a fault. What: /sys/class/hwmon/hwmonX/inY_max Description: Voltage max value. Unit: millivolt RW What: /sys/class/hwmon/hwmonX/inY_crit Description: Voltage critical max value. Unit: millivolt RW If voltage reaches or exceeds this limit, the system may take drastic action such as power down or reset. At the very least, it should report a fault. What: /sys/class/hwmon/hwmonX/inY_input Description: Voltage input value. Unit: millivolt RO Voltage measured on the chip pin. Actual voltage depends on the scaling resistors on the motherboard, as recommended in the chip datasheet. This varies by chip and by motherboard. Because of this variation, values are generally NOT scaled by the chip driver, and must be done by the application. However, some drivers (notably lm87 and via686a) do scale, because of internal resistors built into a chip. These drivers will output the actual voltage. Rule of thumb: drivers should report the voltage values at the "pins" of the chip. What: /sys/class/hwmon/hwmonX/inY_average Description: Average voltage Unit: millivolt RO What: /sys/class/hwmon/hwmonX/inY_lowest Description: Historical minimum voltage Unit: millivolt RO What: /sys/class/hwmon/hwmonX/inY_highest Description: Historical maximum voltage Unit: millivolt RO What: /sys/class/hwmon/hwmonX/inY_reset_history Description: Reset inX_lowest and inX_highest WO What: /sys/class/hwmon/hwmonX/in_reset_history Description: Reset inX_lowest and inX_highest for all sensors WO What: /sys/class/hwmon/hwmonX/inY_label Description: Suggested voltage channel label. Text string Should only be created if the driver has hints about what this voltage channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. RO What: /sys/class/hwmon/hwmonX/inY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/inY_fault Description: Reports a voltage hard failure (eg: shorted component) - 1: Failed - 0: Ok RO What: /sys/class/hwmon/hwmonX/cpuY_vid Description: CPU core reference voltage. Unit: millivolt RO Not always correct. What: /sys/class/hwmon/hwmonX/vrm Description: Voltage Regulator Module version number. RW (but changing it should no more be necessary) Originally the VRM standard version multiplied by 10, but now an arbitrary number, as not all standards have a version number. Affects the way the driver calculates the CPU core reference voltage from the vid pins. What: /sys/class/hwmon/hwmonX/inY_rated_min Description: Minimum rated voltage. Unit: millivolt RO What: /sys/class/hwmon/hwmonX/inY_rated_max Description: Maximum rated voltage. Unit: millivolt RO What: /sys/class/hwmon/hwmonX/fanY_min Description: Fan minimum value Unit: revolution/min (RPM) RW What: /sys/class/hwmon/hwmonX/fanY_max Description: Fan maximum value Unit: revolution/min (RPM) Only rarely supported by the hardware. RW What: /sys/class/hwmon/hwmonX/fanY_input Description: Fan input value. Unit: revolution/min (RPM) RO What: /sys/class/hwmon/hwmonX/fanY_div Description: Fan divisor. Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128). RW Some chips only support values 1, 2, 4 and 8. Note that this is actually an internal clock divisor, which affects the measurable speed range, not the read value. What: /sys/class/hwmon/hwmonX/fanY_pulses Description: Number of tachometer pulses per fan revolution. Integer value, typically between 1 and 4. RW This value is a characteristic of the fan connected to the device's input, so it has to be set in accordance with the fan model. Should only be created if the chip has a register to configure the number of pulses. In the absence of such a register (and thus attribute) the value assumed by all devices is 2 pulses per fan revolution. What: /sys/class/hwmon/hwmonX/fanY_target Description: Desired fan speed Unit: revolution/min (RPM) RW Only makes sense if the chip supports closed-loop fan speed control based on the measured fan speed. What: /sys/class/hwmon/hwmonX/fanY_label Description: Suggested fan channel label. Text string Should only be created if the driver has hints about what this fan channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. RO What: /sys/class/hwmon/hwmonX/fanY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/fanY_fault Description: Reports if a fan has reported failure. - 1: Failed - 0: Ok RO What: /sys/class/hwmon/hwmonX/pwmY Description: Pulse width modulation fan control. Integer value in the range 0 to 255 RW 255 is max or 100%. What: /sys/class/hwmon/hwmonX/pwmY_enable Description: Fan speed control method: - 0: no fan speed control (i.e. fan at full speed) - 1: manual fan speed control enabled (using `pwmY`) - 2+: automatic fan speed control enabled Check individual chip documentation files for automatic mode details. RW What: /sys/class/hwmon/hwmonX/pwmY_mode Description: - 0: DC mode (direct current) - 1: PWM mode (pulse-width modulation) RW What: /sys/class/hwmon/hwmonX/pwmY_freq Description: Base PWM frequency in Hz. Only possibly available when pwmN_mode is PWM, but not always present even then. RW What: /sys/class/hwmon/hwmonX/pwmY_auto_channels_temp Description: Select which temperature channels affect this PWM output in auto mode. Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc... Which values are possible depend on the chip used. RW What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_pwm What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp_hyst Description: Define the PWM vs temperature curve. Number of trip points is chip-dependent. Use this for chips which associate trip points to PWM output channels. RW What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_pwm What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp_hyst Description: Define the PWM vs temperature curve. Number of trip points is chip-dependent. Use this for chips which associate trip points to temperature channels. RW What: /sys/class/hwmon/hwmonX/tempY_type Description: Sensor type selection. Integers 1 to 6 RW - 1: CPU embedded diode - 2: 3904 transistor - 3: thermal diode - 4: thermistor - 5: AMD AMDSI - 6: Intel PECI Not all types are supported by all chips What: /sys/class/hwmon/hwmonX/tempY_max Description: Temperature max value. Unit: millidegree Celsius (or millivolt, see below) RW What: /sys/class/hwmon/hwmonX/tempY_max_alarm Description: Maximum temperature alarm flag. - 0: OK - 1: temperature has reached tempY_max RO What: /sys/class/hwmon/hwmonX/tempY_min Description: Temperature min value. Unit: millidegree Celsius RW What: /sys/class/hwmon/hwmonX/tempY_min_alarm Description: Minimum temperature alarm flag. - 0: OK - 1: temperature has reached tempY_min RO What: /sys/class/hwmon/hwmonX/tempY_max_hyst Description: Temperature hysteresis value for max limit. Unit: millidegree Celsius Must be reported as an absolute temperature, NOT a delta from the max value. RW What: /sys/class/hwmon/hwmonX/tempY_min_hyst Description: Temperature hysteresis value for min limit. Unit: millidegree Celsius Must be reported as an absolute temperature, NOT a delta from the min value. RW What: /sys/class/hwmon/hwmonX/tempY_input Description: Temperature input value. Unit: millidegree Celsius RO What: /sys/class/hwmon/hwmonX/tempY_crit Description: Temperature critical max value, typically greater than corresponding temp_max values. Unit: millidegree Celsius RW What: /sys/class/hwmon/hwmonX/tempY_crit_alarm Description: Critical high temperature alarm flag. - 0: OK - 1: temperature has reached tempY_crit RO What: /sys/class/hwmon/hwmonX/tempY_crit_hyst Description: Temperature hysteresis value for critical limit. Unit: millidegree Celsius Must be reported as an absolute temperature, NOT a delta from the critical value. RW What: /sys/class/hwmon/hwmonX/tempY_emergency Description: Temperature emergency max value, for chips supporting more than two upper temperature limits. Must be equal or greater than corresponding temp_crit values. Unit: millidegree Celsius RW What: /sys/class/hwmon/hwmonX/tempY_emergency_alarm Description: Emergency high temperature alarm flag. - 0: OK - 1: temperature has reached tempY_emergency RO What: /sys/class/hwmon/hwmonX/tempY_emergency_hyst Description: Temperature hysteresis value for emergency limit. Unit: millidegree Celsius Must be reported as an absolute temperature, NOT a delta from the emergency value. RW What: /sys/class/hwmon/hwmonX/tempY_lcrit Description: Temperature critical min value, typically lower than corresponding temp_min values. Unit: millidegree Celsius RW What: /sys/class/hwmon/hwmonX/tempY_lcrit_hyst Description: Temperature hysteresis value for critical min limit. Unit: millidegree Celsius Must be reported as an absolute temperature, NOT a delta from the critical min value. RW What: /sys/class/hwmon/hwmonX/tempY_offset Description: Temperature offset which is added to the temperature reading by the chip. Unit: millidegree Celsius Read/Write value. What: /sys/class/hwmon/hwmonX/tempY_label Description: Suggested temperature channel label. Text string Should only be created if the driver has hints about what this temperature channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. RO What: /sys/class/hwmon/hwmonX/tempY_lowest Description: Historical minimum temperature Unit: millidegree Celsius RO What: /sys/class/hwmon/hwmonX/tempY_highest Description: Historical maximum temperature Unit: millidegree Celsius RO What: /sys/class/hwmon/hwmonX/tempY_reset_history Description: Reset temp_lowest and temp_highest WO What: /sys/class/hwmon/hwmonX/temp_reset_history Description: Reset temp_lowest and temp_highest for all sensors WO What: /sys/class/hwmon/hwmonX/tempY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/tempY_rated_min Description: Minimum rated temperature. Unit: millidegree Celsius RO What: /sys/class/hwmon/hwmonX/tempY_rated_max Description: Maximum rated temperature. Unit: millidegree Celsius RO What: /sys/class/hwmon/hwmonX/currY_max Description: Current max value Unit: milliampere RW What: /sys/class/hwmon/hwmonX/currY_min Description: Current min value. Unit: milliampere RW What: /sys/class/hwmon/hwmonX/currY_lcrit Description: Current critical low value Unit: milliampere RW What: /sys/class/hwmon/hwmonX/currY_crit Description: Current critical high value. Unit: milliampere RW What: /sys/class/hwmon/hwmonX/currY_input Description: Current input value Unit: milliampere RO What: /sys/class/hwmon/hwmonX/currY_average Description: Average current use Unit: milliampere RO What: /sys/class/hwmon/hwmonX/currY_lowest Description: Historical minimum current Unit: milliampere RO What: /sys/class/hwmon/hwmonX/currY_highest Description: Historical maximum current Unit: milliampere RO What: /sys/class/hwmon/hwmonX/currY_reset_history Description: Reset currX_lowest and currX_highest WO What: /sys/class/hwmon/hwmonX/curr_reset_history Description: Reset currX_lowest and currX_highest for all sensors WO What: /sys/class/hwmon/hwmonX/currY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/currY_rated_min Description: Minimum rated current. Unit: milliampere RO What: /sys/class/hwmon/hwmonX/currY_rated_max Description: Maximum rated current. Unit: milliampere RO What: /sys/class/hwmon/hwmonX/powerY_average Description: Average power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_average_interval Description: Power use averaging interval. A poll notification is sent to this file if the hardware changes the averaging interval. Unit: milliseconds RW What: /sys/class/hwmon/hwmonX/powerY_average_interval_max Description: Maximum power use averaging interval Unit: milliseconds RO What: /sys/class/hwmon/hwmonX/powerY_average_interval_min Description: Minimum power use averaging interval Unit: milliseconds RO What: /sys/class/hwmon/hwmonX/powerY_average_highest Description: Historical average maximum power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_average_lowest Description: Historical average minimum power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_average_max Description: A poll notification is sent to `powerY_average` when power use rises above this value. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_average_min Description: A poll notification is sent to `powerY_average` when power use sinks below this value. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_input Description: Instantaneous power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_input_highest Description: Historical maximum power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_input_lowest Description: Historical minimum power use Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_reset_history Description: Reset input_highest, input_lowest, average_highest and average_lowest. WO What: /sys/class/hwmon/hwmonX/powerY_accuracy Description: Accuracy of the power meter. Unit: Percent RO What: /sys/class/hwmon/hwmonX/powerY_cap Description: If power use rises above this limit, the system should take action to reduce power use. A poll notification is sent to this file if the cap is changed by the hardware. The `*_cap` files only appear if the cap is known to be enforced by hardware. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_cap_hyst Description: Margin of hysteresis built around capping and notification. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_cap_max Description: Maximum cap that can be set. Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_cap_min Description: Minimum cap that can be set. Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_max Description: Maximum power. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_crit Description: Critical maximum power. If power rises to or above this limit, the system is expected take drastic action to reduce power consumption, such as a system shutdown or a forced powerdown of some devices. Unit: microWatt RW What: /sys/class/hwmon/hwmonX/powerY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/powerY_rated_min Description: Minimum rated power. Unit: microWatt RO What: /sys/class/hwmon/hwmonX/powerY_rated_max Description: Maximum rated power. Unit: microWatt RO What: /sys/class/hwmon/hwmonX/energyY_input Description: Cumulative energy use Unit: microJoule RO What: /sys/class/hwmon/hwmonX/energyY_enable Description: Enable or disable the sensors. When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/humidityY_alarm Description: Humidity limit detection - 0: OK - 1: Humidity limit has been reached RO What: /sys/class/hwmon/hwmonX/humidityY_enable Description: Enable or disable the sensors When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable RW What: /sys/class/hwmon/hwmonX/humidityY_fault Description: Reports a humidity sensor failure. - 1: Failed - 0: Ok RO What: /sys/class/hwmon/hwmonX/humidityY_input Description: Humidity Unit: milli-percent (per cent mille, pcm) RO What: /sys/class/hwmon/hwmonX/humidityY_label Description: Suggested humidity channel label. Text string Should only be created if the driver has hints about what this humidity channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. RO What: /sys/class/hwmon/hwmonX/humidityY_max Description: Humidity max value. Unit: milli-percent (per cent mille, pcm) RW What: /sys/class/hwmon/hwmonX/humidityY_max_alarm Description: Maximum humidity detection - 0: OK - 1: Maximum humidity detected RO What: /sys/class/hwmon/hwmonX/humidityY_max_hyst Description: Humidity hysteresis value for max limit. Unit: milli-percent (per cent mille, pcm) Must be reported as an absolute humidity, NOT a delta from the max value. RW What: /sys/class/hwmon/hwmonX/humidityY_min Description: Humidity min value. Unit: milli-percent (per cent mille, pcm) RW What: /sys/class/hwmon/hwmonX/humidityY_min_alarm Description: Minimum humidity detection - 0: OK - 1: Minimum humidity detected RO What: /sys/class/hwmon/hwmonX/humidityY_min_hyst Description: Humidity hysteresis value for min limit. Unit: milli-percent (per cent mille, pcm) Must be reported as an absolute humidity, NOT a delta from the min value. RW What: /sys/class/hwmon/hwmonX/humidityY_rated_min Description: Minimum rated humidity. Unit: milli-percent (per cent mille, pcm) RO What: /sys/class/hwmon/hwmonX/humidityY_rated_max Description: Maximum rated humidity. Unit: milli-percent (per cent mille, pcm) RO What: /sys/class/hwmon/hwmonX/intrusionY_alarm Description: Chassis intrusion detection - 0: OK - 1: intrusion detected RW Contrary to regular alarm flags which clear themselves automatically when read, this one sticks until cleared by the user. This is done by writing 0 to the file. Writing other values is unsupported. What: /sys/class/hwmon/hwmonX/intrusionY_beep Description: Chassis intrusion beep - 0: disable - 1: enable RW What: /sys/class/hwmon/hwmonX/device/pec Description: PEC support on I2C devices - 0, off, n: disable - 1, on, y: enable RW |