Based on kernel version 6.12.4. Page generated on 2024-12-12 21:01 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 | What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Toggle enable. Write 1 to enable toggle or 0 to disable it. This is useful when one wants to change the DAC output codes. For autonomous toggling, the way it should be done is: - disable toggle operation; - change out_currentY_rawN, where N is the integer value of the symbol; - enable toggle operation. What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: This attribute has the same meaning as out_currentY_raw. It is specific to toggle enabled channels and refers to the DAC output code in INPUT_N (_rawN), where N is the integer value of the symbol. The same scale and offset as in out_currentY_raw applies. What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Performs a SW switch to a predefined output symbol. This attribute is specific to toggle enabled channels and allows switching between multiple predefined symbols. Each symbol corresponds to a different output, denoted as out_currentY_rawN, where N is the integer value of the symbol. Writing an integer value N will select out_currentY_rawN. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Toggle enable. Write 1 to enable toggle or 0 to disable it. This is useful when one wants to change the DAC output codes. For autonomous toggling, the way it should be done is: - disable toggle operation; - change out_voltageY_rawN, where N is the integer value of the symbol; - enable toggle operation. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: This attribute has the same meaning as out_currentY_raw. It is specific to toggle enabled channels and refers to the DAC output code in INPUT_N (_rawN), where N is the integer value of the symbol. The same scale and offset as in out_currentY_raw applies. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Performs a SW switch to a predefined output symbol. This attribute is specific to toggle enabled channels and allows switching between multiple predefined symbols. Each symbol corresponds to a different output, denoted as out_voltageY_rawN, where N is the integer value of the symbol. Writing an integer value N will select out_voltageY_rawN. |