Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 |
What: /sys/kernel/config/most_<component>
Date: March 8, 2019
KernelVersion: 5.2
Description: Interface is used to configure and connect device channels
to component drivers.
Attributes are visible only when configfs is mounted. To mount
configfs in /sys/kernel/config directory use:
# mount -t configfs none /sys/kernel/config/
What: /sys/kernel/config/most_cdev/<link>
Date: March 8, 2019
KernelVersion: 5.2
Description:
The attributes:
buffer_size
configure the buffer size for this channel
subbuffer_size
configure the sub-buffer size for this channel
(needed for synchronous and isochronous data)
num_buffers
configure number of buffers used for this
channel
datatype
configure type of data that will travel over
this channel
direction
configure whether this link will be an input
or output
dbr_size
configure DBR data buffer size (this is used
for MediaLB communication only)
packets_per_xact
configure the number of packets that will be
collected from the network before being
transmitted via USB (this is used for USB
communication only)
device
name of the device the link is to be attached to
channel
name of the channel the link is to be attached to
comp_params
pass parameters needed by some components
create_link
write '1' to this attribute to trigger the
creation of the link. In case of speculative
configuration, the creation is post-poned until
a physical device is being attached to the bus.
destroy_link
write '1' to this attribute to destroy an
active link
What: /sys/kernel/config/most_video/<link>
Date: March 8, 2019
KernelVersion: 5.2
Description:
The attributes:
buffer_size
configure the buffer size for this channel
subbuffer_size
configure the sub-buffer size for this channel
(needed for synchronous and isochronous data)
num_buffers
configure number of buffers used for this
channel
datatype
configure type of data that will travel over
this channel
direction
configure whether this link will be an input
or output
dbr_size
configure DBR data buffer size (this is used
for MediaLB communication only)
packets_per_xact
configure the number of packets that will be
collected from the network before being
transmitted via USB (this is used for USB
communication only)
device
name of the device the link is to be attached to
channel
name of the channel the link is to be attached to
comp_params
pass parameters needed by some components
create_link
write '1' to this attribute to trigger the
creation of the link. In case of speculative
configuration, the creation is post-poned until
a physical device is being attached to the bus.
destroy_link
write '1' to this attribute to destroy an
active link
What: /sys/kernel/config/most_net/<link>
Date: March 8, 2019
KernelVersion: 5.2
Description:
The attributes:
buffer_size
configure the buffer size for this channel
subbuffer_size
configure the sub-buffer size for this channel
(needed for synchronous and isochronous data)
num_buffers
configure number of buffers used for this
channel
datatype
configure type of data that will travel over
this channel
direction
configure whether this link will be an input
or output
dbr_size
configure DBR data buffer size (this is used
for MediaLB communication only)
packets_per_xact
configure the number of packets that will be
collected from the network before being
transmitted via USB (this is used for USB
communication only)
device
name of the device the link is to be attached to
channel
name of the channel the link is to be attached to
comp_params
pass parameters needed by some components
create_link
write '1' to this attribute to trigger the
creation of the link. In case of speculative
configuration, the creation is post-poned until
a physical device is being attached to the bus.
destroy_link
write '1' to this attribute to destroy an
active link
What: /sys/kernel/config/most_sound/<card>
Date: March 8, 2019
KernelVersion: 5.2
Description:
The attributes:
create_card
write '1' to this attribute to trigger the
registration of the sound card with the ALSA
subsystem.
What: /sys/kernel/config/most_sound/<card>/<link>
Date: March 8, 2019
KernelVersion: 5.2
Description:
The attributes:
buffer_size
configure the buffer size for this channel
subbuffer_size
configure the sub-buffer size for this channel
(needed for synchronous and isochronous data)
num_buffers
configure number of buffers used for this
channel
datatype
configure type of data that will travel over
this channel
direction
configure whether this link will be an input
or output
dbr_size
configure DBR data buffer size (this is used
for MediaLB communication only)
packets_per_xact
configure the number of packets that will be
collected from the network before being
transmitted via USB (this is used for USB
communication only)
device
name of the device the link is to be attached to
channel
name of the channel the link is to be attached to
comp_params
pass parameters needed by some components
create_link
write '1' to this attribute to trigger the
creation of the link. In case of speculative
configuration, the creation is post-poned until
a physical device is being attached to the bus.
destroy_link
write '1' to this attribute to destroy an
active link
|