Documentation / devicetree / bindings / sound / rt5660.txt


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
RT5660 audio CODEC

This device supports I2C only.

Required properties:

- compatible : "realtek,rt5660".

- reg : The I2C address of the device.

Optional properties:

- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"

- realtek,in1-differential
- realtek,in3-differential
  Boolean. Indicate MIC1/3 input are differential, rather than single-ended.

- realtek,poweroff-in-suspend
  Boolean. If the codec will be powered off in suspend, the resume should be
  added delay time for waiting codec power ready.

- realtek,dmic1-data-pin
  0: dmic1 is not used
  1: using GPIO2 pin as dmic1 data pin
  2: using IN1P pin as dmic1 data pin

Pins on the device (for linking into audio routes) for RT5660:

  * DMIC L1
  * DMIC R1
  * IN1P
  * IN1N
  * IN2P
  * IN3P
  * IN3N
  * SPO
  * LOUTL
  * LOUTR

Example:

rt5660 {
	compatible = "realtek,rt5660";
	reg = <0x1c>;
};