Documentation / devicetree / bindings / sound / ac97-bus.txt


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Generic AC97 Device Properties

This documents describes the devicetree bindings for an ac97 controller child
node describing ac97 codecs.

Required properties:
-compatible : Must be "ac97,vendor_id1,vendor_id2
	      The ids shall be the 4 characters hexadecimal encoding, such as
	      given by "%04x" formatting of printf
-reg	    : Must be the ac97 codec number, between 0 and 3

Example:
ac97: sound@40500000 {
	compatible = "marvell,pxa270-ac97";
	reg = < 0x40500000 0x1000 >;
	interrupts = <14>;
	reset-gpios = <&gpio 95 GPIO_ACTIVE_HIGH>;
	#sound-dai-cells = <1>;
	pinctrl-names = "default";
	pinctrl-0 = < &pinctrl_ac97_default >;
	clocks = <&clks CLK_AC97>, <&clks CLK_AC97CONF>;
	clock-names = "AC97CLK", "AC97CONFCLK";

	#address-cells = <1>;
	#size-cells = <0>;
	audio-codec@0 {
		reg = <0>;
		compatible = "ac97,574d,4c13";
		clocks = <&fixed_wm9713_clock>;
		clock-names = "ac97_clk";
	}
};