Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 | AC97 link bindings These bindings can be included within any other device node. Required properties: - pinctrl-names: Has to contain following states to setup the correct pinmuxing for the used gpios: "ac97-running": AC97-link is active "ac97-reset": AC97-link reset state "ac97-warm-reset": AC97-link warm reset state - ac97-gpios: List of gpio phandles with args in the order ac97-sync, ac97-sdata, ac97-reset Example: ssi { ... pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset"; pinctrl-0 = <&ac97link_running>; pinctrl-1 = <&ac97link_running>; pinctrl-2 = <&ac97link_reset>; pinctrl-3 = <&ac97link_warm_reset>; ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>; ... }; |