Based on kernel version 6.13
. Page generated on 2025-01-21 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/socionext,uniphier-aio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: UniPhier AIO audio system maintainers: - <alsa-devel@alsa-project.org> allOf: - $ref: dai-common.yaml# properties: compatible: enum: - socionext,uniphier-ld11-aio - socionext,uniphier-ld20-aio - socionext,uniphier-pxs2-aio reg: maxItems: 1 interrupts: maxItems: 1 clock-names: const: aio clocks: maxItems: 1 reset-names: const: aio resets: maxItems: 1 socionext,syscon: description: | Specifies a phandle to soc-glue, which is used for changing mode of S/PDIF signal pin to output from Hi-Z. This property is optional if you use I2S signal pins only. $ref: /schemas/types.yaml#/definitions/phandle "#sound-dai-cells": const: 1 patternProperties: "^port@[0-9]$": description: | Port number of DT node is specified by the following DAI channels that depends on SoC. ld11-aio,ld20-aio: 0: hdmi 1: pcmin2 2: line 3: hpcmout1 4: pcmout3 5: hiecout1 6: epcmout2 7: epcmout3 8: hieccompout1 pxs2-aio: 0: hdmi 1: line 2: aux 3: hiecout1 4: iecout1 5: hieccompout1 6: ieccompout1 $ref: audio-graph-port.yaml# unevaluatedProperties: false unevaluatedProperties: false required: - compatible - reg - interrupts - clock-names - clocks - reset-names - resets - "#sound-dai-cells" examples: - | audio@56000000 { compatible = "socionext,uniphier-ld20-aio"; reg = <0x56000000 0x80000>; interrupts = <0 144 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_aout>; clock-names = "aio"; clocks = <&sys_clk 40>; reset-names = "aio"; resets = <&sys_rst 40>; #sound-dai-cells = <1>; socionext,syscon = <&soc_glue>; }; |