# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/microchip,pic32mzda-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip PIC32 Pin Controller

maintainers:
  - Linus Walleij <linusw@kernel.org>

description:
  PIC32 pin configuration node is a node of a group of pins which can be used
  for a specific device or function. This node represents configurations of
  pins, optional function, and optional mux related configuration.

properties:
  compatible:
    const: microchip,pic32mzda-pinctrl

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

$defs:
  pin-node:
    type: object
    allOf:
      - $ref: /schemas/pinctrl/pincfg-node.yaml#
      - $ref: /schemas/pinctrl/pinmux-node.yaml#

    properties:
      pins:
        description: List of pins to which the configuration applies.
        items:
          type: string
        minItems: 1

      function: true

      bias-pull-up: true
      bias-pull-down: true
      input-enable: true
      output-low: true
      output-high: true

      microchip,digital:
        description: Enable digital I/O.
        type: boolean

      microchip,analog:
        description: Enable analog I/O.
        type: boolean

    required:
      - pins

    unevaluatedProperties: false

additionalProperties:
  oneOf:
    - additionalProperties:
        $ref: '#/$defs/pin-node'
    - $ref: '#/$defs/pin-node'

required:
  - compatible
  - reg
  - clocks

examples:
  - |
    #include <dt-bindings/clock/microchip,pic32-clock.h>
    #include <dt-bindings/interrupt-controller/irq.h>
 
    pic32_pinctrl: pinctrl@1f801400 {
        compatible = "microchip,pic32mzda-pinctrl";
        reg = <0x1f801400 0x400>;
        clocks = <&rootclk PB1CLK>;
 
        pinctrl_uart2: pinctrl_uart2 {
            uart2-tx {
                pins = "G9";
                function = "U2TX";
                microchip,digital;
                output-low;
            };
 
            uart2-rx {
                pins = "B0";
                function = "U2RX";
                microchip,digital;
                input-enable;
            };
        };
    };
 
    uart2: serial@1f822200 {
        compatible = "microchip,pic32mzda-uart";
        reg = <0x1f822200 0x50>;
        interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
                     <146 IRQ_TYPE_LEVEL_HIGH>,
                     <147 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&rootclk PB2CLK>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_uart2>;
    };