Based on kernel version 6.12.4
. Page generated on 2024-12-12 21:01 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 | * AppliedMicro X-Gene v1 PCIe MSI controller Required properties: - compatible: should be "apm,xgene1-msi" to identify X-Gene v1 PCIe MSI controller block. - msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node - reg: physical base address (0x79000000) and length (0x900000) for controller registers. These registers include the MSI termination address and data registers as well as the MSI interrupt status registers. - reg-names: not required - interrupts: A list of 16 interrupt outputs of the controller, starting from interrupt number 0x10 to 0x1f. - interrupt-names: not required Each PCIe node needs to have property msi-parent that points to an MSI controller node Examples: SoC DTSI: + MSI node: msi@79000000 { compatible = "apm,xgene1-msi"; msi-controller; reg = <0x00 0x79000000 0x0 0x900000>; interrupts = <0x0 0x10 0x4> <0x0 0x11 0x4> <0x0 0x12 0x4> <0x0 0x13 0x4> <0x0 0x14 0x4> <0x0 0x15 0x4> <0x0 0x16 0x4> <0x0 0x17 0x4> <0x0 0x18 0x4> <0x0 0x19 0x4> <0x0 0x1a 0x4> <0x0 0x1b 0x4> <0x0 0x1c 0x4> <0x0 0x1d 0x4> <0x0 0x1e 0x4> <0x0 0x1f 0x4>; }; + PCIe controller node with msi-parent property pointing to MSI node: pcie0: pcie@1f2b0000 { device_type = "pci"; compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ reg-names = "csr", "cfg"; ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; dma-coherent; clocks = <&pcie0clk 0>; msi-parent= <&msi>; }; |