Documentation / devicetree / bindings / pci / qcom,pcie-x1e80100.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm X1E80100 PCI Express Root Complex

maintainers:
  - Bjorn Andersson <andersson@kernel.org>
  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

description:
  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
  the Synopsys DesignWare PCIe IP.

properties:
  compatible:
    const: qcom,pcie-x1e80100

  reg:
    minItems: 5
    maxItems: 6

  reg-names:
    minItems: 5
    items:
      - const: parf # Qualcomm specific registers
      - const: dbi # DesignWare PCIe registers
      - const: elbi # External local bus interface registers
      - const: atu # ATU address space
      - const: config # PCIe configuration space
      - const: mhi # MHI registers

  clocks:
    minItems: 7
    maxItems: 7

  clock-names:
    items:
      - const: aux # Auxiliary clock
      - const: cfg # Configuration clock
      - const: bus_master # Master AXI clock
      - const: bus_slave # Slave AXI clock
      - const: slave_q2a # Slave Q2A clock
      - const: noc_aggr # Aggre NoC PCIe AXI clock
      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock

  interrupts:
    minItems: 8
    maxItems: 8

  interrupt-names:
    items:
      - const: msi0
      - const: msi1
      - const: msi2
      - const: msi3
      - const: msi4
      - const: msi5
      - const: msi6
      - const: msi7

  resets:
    minItems: 1
    maxItems: 2

  reset-names:
    minItems: 1
    items:
      - const: pci # PCIe core reset
      - const: link_down # PCIe link down reset

allOf:
  - $ref: qcom,pcie-common.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
    soc {
        #address-cells = <2>;
        #size-cells = <2>;
 
        pcie@1c08000 {
            compatible = "qcom,pcie-x1e80100";
            reg = <0 0x01c08000 0 0x3000>,
                  <0 0x7c000000 0 0xf1d>,
                  <0 0x7c000f40 0 0xa8>,
                  <0 0x7c001000 0 0x1000>,
                  <0 0x7c100000 0 0x100000>,
                  <0 0x01c0b000 0 0x1000>;
            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
            bus-range = <0x00 0xff>;
            device_type = "pci";
            linux,pci-domain = <0>;
            num-lanes = <2>;
 
            #address-cells = <3>;
            #size-cells = <2>;
 
            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
            clock-names = "aux",
                          "cfg",
                          "bus_master",
                          "bus_slave",
                          "slave_q2a",
                          "noc_aggr",
                          "cnoc_sf_axi";
 
            dma-coherent;
 
            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "msi0", "msi1", "msi2", "msi3",
                              "msi4", "msi5", "msi6", "msi7";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0x7>;
            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
            interconnect-names = "pcie-mem", "cpu-pcie";
 
            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
                        <0x100 &apps_smmu 0x1401 0x1>;
 
            phys = <&pcie4_phy>;
            phy-names = "pciephy";
 
            pinctrl-0 = <&pcie0_default_state>;
            pinctrl-names = "default";
 
            power-domains = <&gcc GCC_PCIE_4_GDSC>;
 
            resets = <&gcc GCC_PCIE_4_BCR>;
            reset-names = "pci";
 
            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
        };
    };