Documentation / devicetree / bindings / pci / nvidia,tegra194-pcie-ep.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)

maintainers:
  - Thierry Reding <thierry.reding@gmail.com>
  - Jon Hunter <jonathanh@nvidia.com>
  - Vidya Sagar <vidyas@nvidia.com>

description: |
  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
  of the controller instances are dual mode; they can work either in Root
  Port mode or Endpoint mode but one at a time.
 
  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
 
  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
  operate in the Endpoint mode because of the way the platform is designed.

properties:
  compatible:
    enum:
      - nvidia,tegra194-pcie-ep
      - nvidia,tegra234-pcie-ep

  reg:
    items:
      - description: controller's application logic registers
      - description: iATU and DMA registers. This is where the iATU (internal
          Address Translation Unit) registers of the PCIe core are made
          available for software access.
      - description: aperture where the Root Port's own configuration
          registers are available.
      - description: aperture used to map the remote Root Complex address space

  reg-names:
    items:
      - const: appl
      - const: atu_dma
      - const: dbi
      - const: addr_space

  interrupts:
    items:
      - description: controller interrupt

  interrupt-names:
    items:
      - const: intr

  clocks:
    items:
      - description: module clock

  clock-names:
    items:
      - const: core

  resets:
    items:
      - description: APB bus interface reset
      - description: module reset

  reset-names:
    items:
      - const: apb
      - const: core

  reset-gpios:
    description: Must contain a phandle to a GPIO controller followed by GPIO
      that is being used as PERST input signal. Please refer to pci.txt.

  phys:
    minItems: 1
    maxItems: 8

  phy-names:
    minItems: 1
    items:
      - const: p2u-0
      - const: p2u-1
      - const: p2u-2
      - const: p2u-3
      - const: p2u-4
      - const: p2u-5
      - const: p2u-6
      - const: p2u-7

  power-domains:
    maxItems: 1
    description: |
      A phandle to the node that controls power to the respective PCIe
      controller and a specifier name for the PCIe controller.
 
      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"

  interconnects:
    items:
      - description: memory read client
      - description: memory write client

  interconnect-names:
    items:
      - const: dma-mem # read
      - const: write

  dma-coherent: true

  nvidia,bpmp:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: |
      Must contain a pair of phandles to BPMP controller node followed by
      controller ID. Following are the controller IDs for each controller:
 
      Tegra194
 
        0: C0
        1: C1
        2: C2
        3: C3
        4: C4
        5: C5
 
      Tegra234
 
        0 : C0
        1 : C1
        2 : C2
        3 : C3
        4 : C4
        5 : C5
        6 : C6
        7 : C7
        8 : C8
        9 : C9
        10: C10

    items:
      - items:
          - description: phandle to BPMP controller node
          - description: PCIe controller ID
            maximum: 10

  nvidia,aspm-cmrt-us:
    description: Common Mode Restore Time for proper operation of ASPM to be
      specified in microseconds

  nvidia,aspm-pwr-on-t-us:
    description: Power On time for proper operation of ASPM to be specified in
      microseconds

  nvidia,aspm-l0s-entrance-latency-us:
    description: ASPM L0s entrance latency to be specified in microseconds

  vddio-pex-ctl-supply:
    description: A phandle to the regulator supply for PCIe side band signals

  nvidia,refclk-select-gpios:
    maxItems: 1
    description: GPIO used to enable REFCLK to controller from the host

  nvidia,enable-ext-refclk:
    description: |
      This boolean property needs to be present if the controller is configured
      to receive Reference Clock from the host.
      NOTE: This is applicable only for Tegra234.

    $ref: /schemas/types.yaml#/definitions/flag

  nvidia,enable-srns:
    description: |
      This boolean property needs to be present if the controller is
      configured to operate in SRNS (Separate Reference Clocks with No
      Spread-Spectrum Clocking).  NOTE: This is applicable only for
      Tegra234.

    $ref: /schemas/types.yaml#/definitions/flag

allOf:
  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#

unevaluatedProperties: false

required:
  - interrupts
  - interrupt-names
  - clocks
  - clock-names
  - resets
  - reset-names
  - power-domains
  - reset-gpios
  - vddio-pex-ctl-supply
  - num-lanes
  - phys
  - phy-names
  - nvidia,bpmp

examples:
  - |
    #include <dt-bindings/clock/tegra194-clock.h>
    #include <dt-bindings/gpio/tegra194-gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/tegra194-powergate.h>
    #include <dt-bindings/reset/tegra194-reset.h>
 
    bus@0 {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges = <0x0 0x0 0x0 0x8 0x0>;
 
        pcie-ep@141a0000 {
            compatible = "nvidia,tegra194-pcie-ep";
            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
            reg-names = "appl", "atu_dma", "dbi", "addr_space";
            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
            interrupt-names = "intr";
 
            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
            clock-names = "core";
 
            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
            reset-names = "apb", "core";
 
            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
            pinctrl-names = "default";
            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
 
            nvidia,bpmp = <&bpmp 5>;
 
            nvidia,aspm-cmrt-us = <60>;
            nvidia,aspm-pwr-on-t-us = <20>;
            nvidia,aspm-l0s-entrance-latency-us = <3>;
 
            vddio-pex-ctl-supply = <&vdd_1v8ao>;
 
            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
 
            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
                                          GPIO_ACTIVE_HIGH>;
 
            num-lanes = <8>;
 
            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
 
            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
                        "p2u-5", "p2u-6", "p2u-7";
        };
    };

  - |
    #include <dt-bindings/clock/tegra234-clock.h>
    #include <dt-bindings/gpio/tegra234-gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/tegra234-powergate.h>
    #include <dt-bindings/reset/tegra234-reset.h>
 
    bus@0 {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges = <0x0 0x0 0x0 0x8 0x0>;
 
        pcie-ep@141a0000 {
            compatible = "nvidia,tegra234-pcie-ep";
            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
            reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
            interrupt-names = "intr";
 
            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
            clock-names = "core";
 
            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
            reset-names = "apb", "core";
 
            nvidia,bpmp = <&bpmp 5>;
 
            nvidia,enable-ext-refclk;
            nvidia,aspm-cmrt-us = <60>;
            nvidia,aspm-pwr-on-t-us = <20>;
            nvidia,aspm-l0s-entrance-latency-us = <3>;
 
            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
 
            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
 
            nvidia,refclk-select-gpios = <&gpio_aon
                                          TEGRA234_AON_GPIO(AA, 4)
                                          GPIO_ACTIVE_HIGH>;
 
            num-lanes = <8>;
 
            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
 
            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
                        "p2u-5", "p2u-6", "p2u-7";
        };
    };