# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/spacemit,k1-pcie-host.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: SpacemiT K1 PCI Express Host Controller

maintainers:
  - Alex Elder <elder@riscstar.com>

description: >
  The SpacemiT K1 SoC PCIe host controller is based on the Synopsys DesignWare
  PCIe IP.  The controller uses the DesignWare built-in MSI interrupt
  controller, and supports 256 MSIs.

allOf:
  - $ref: /schemas/pci/snps,dw-pcie.yaml#

properties:
  compatible:
    const: spacemit,k1-pcie

  reg:
    items:
      - description: DesignWare PCIe registers
      - description: ATU address space
      - description: PCIe configuration space
      - description: Link control registers

  reg-names:
    items:
      - const: dbi
      - const: atu
      - const: config
      - const: link

  clocks:
    items:
      - description: DWC PCIe Data Bus Interface (DBI) clock
      - description: DWC PCIe application AXI-bus master interface clock
      - description: DWC PCIe application AXI-bus slave interface clock

  clock-names:
    items:
      - const: dbi
      - const: mstr
      - const: slv

  resets:
    items:
      - description: DWC PCIe Data Bus Interface (DBI) reset
      - description: DWC PCIe application AXI-bus master interface reset
      - description: DWC PCIe application AXI-bus slave interface reset

  reset-names:
    items:
      - const: dbi
      - const: mstr
      - const: slv

  interrupts:
    items:
      - description: Interrupt used for MSIs

  interrupt-names:
    const: msi

  spacemit,apmu:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description:
      A phandle that refers to the APMU system controller, whose regmap is
      used in managing resets and link state, along with and offset of its
      reset control register.
    items:
      - items:
          - description: phandle to APMU system controller
          - description: register offset

patternProperties:
  '^pcie@':
    type: object
    $ref: /schemas/pci/pci-pci-bridge.yaml#

    properties:
      phys:
        maxItems: 1

      vpcie3v3-supply:
        description:
          A phandle for 3.3v regulator to use for PCIe

    required:
      - phys
      - vpcie3v3-supply

    unevaluatedProperties: false

required:
  - clocks
  - clock-names
  - resets
  - reset-names
  - interrupts
  - interrupt-names
  - spacemit,apmu

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/spacemit,k1-syscon.h>
    pcie@ca400000 {
        device_type = "pci";
        compatible = "spacemit,k1-pcie";
        reg = <0xca400000 0x00001000>,
              <0xca700000 0x0001ff24>,
              <0x9f000000 0x00002000>,
              <0xc0c20000 0x00001000>;
        reg-names = "dbi",
                    "atu",
                    "config",
                    "link";
        #address-cells = <3>;
        #size-cells = <2>;
        ranges = <0x01000000 0x0 0x00000000 0x9f002000 0x0 0x00100000>,
                 <0x02000000 0x0 0x90000000 0x90000000 0x0 0x0f000000>;
        interrupts = <142>;
        interrupt-names = "msi";
        clocks = <&syscon_apmu CLK_PCIE1_DBI>,
                 <&syscon_apmu CLK_PCIE1_MASTER>,
                 <&syscon_apmu CLK_PCIE1_SLAVE>;
        clock-names = "dbi",
                      "mstr",
                      "slv";
        resets = <&syscon_apmu RESET_PCIE1_DBI>,
                 <&syscon_apmu RESET_PCIE1_MASTER>,
                 <&syscon_apmu RESET_PCIE1_SLAVE>;
        reset-names = "dbi",
                      "mstr",
                      "slv";
        pinctrl-names = "default";
        pinctrl-0 = <&pcie1_3_cfg>;
        spacemit,apmu = <&syscon_apmu 0x3d4>;
 
        pcie@0 {
          device_type = "pci";
          compatible = "pciclass,0604";
          reg = <0x0 0x0 0x0 0x0 0x0>;
          bus-range = <0x01 0xff>;
          #address-cells = <3>;
          #size-cells = <2>;
          ranges;
          phys = <&pcie1_phy>;
          vpcie3v3-supply = <&pcie_vcc_3v3>;
        };
    };