Based on kernel version 7.0. Page generated on 2026-04-23 09:48 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/qcom,sa8255p-pcie-ep.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm firmware managed PCIe Endpoint Controller description: Qualcomm SA8255p SoC PCIe endpoint controller is based on the Synopsys DesignWare PCIe IP which is managed by firmware. maintainers: - Manivannan Sadhasivam <mani@kernel.org> properties: compatible: const: qcom,sa8255p-pcie-ep reg: items: - description: Qualcomm-specific PARF configuration registers - description: DesignWare PCIe registers - description: External local bus interface registers - description: Address Translation Unit (ATU) registers - description: Memory region used to map remote RC address space - description: BAR memory region - description: DMA register space reg-names: items: - const: parf - const: dbi - const: elbi - const: atu - const: addr_space - const: mmio - const: dma interrupts: items: - description: PCIe Global interrupt - description: PCIe Doorbell interrupt - description: DMA interrupt interrupt-names: items: - const: global - const: doorbell - const: dma iommus: maxItems: 1 reset-gpios: description: GPIO used as PERST# input signal maxItems: 1 wake-gpios: description: GPIO used as WAKE# output signal maxItems: 1 power-domains: maxItems: 1 dma-coherent: true num-lanes: default: 2 required: - compatible - reg - reg-names - interrupts - interrupt-names - reset-gpios - power-domains additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> soc { #address-cells = <2>; #size-cells = <2>; pcie1_ep: pcie-ep@1c10000 { compatible = "qcom,sa8255p-pcie-ep"; reg = <0x0 0x01c10000 0x0 0x3000>, <0x0 0x60000000 0x0 0xf20>, <0x0 0x60000f20 0x0 0xa8>, <0x0 0x60001000 0x0 0x4000>, <0x0 0x60200000 0x0 0x100000>, <0x0 0x01c13000 0x0 0x1000>, <0x0 0x60005000 0x0 0x2000>; reg-names = "parf", "dbi", "elbi", "atu", "addr_space", "mmio", "dma"; interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "global", "doorbell", "dma"; reset-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; dma-coherent; iommus = <&pcie_smmu 0x80 0x7f>; power-domains = <&scmi6_pd 1>; num-lanes = <4>; }; }; |