# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mobileye EyeQ5 pin controller

description: >
  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
  to a system-controller block called OLB.
 
  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
  muxing supports two functions for each pin: first is GPIO, second is
  pin-dependent.
 
  Pins and groups are bijective.

maintainers:
  - Grégory Clement <gregory.clement@bootlin.com>
  - Théo Lebrun <theo.lebrun@bootlin.com>
  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>

$ref: pinctrl.yaml#

properties:
  compatible:
    enum:
      - mobileye,eyeq5-pinctrl

  reg:
    maxItems: 1

patternProperties:
  "-pins?$":
    type: object
    description: Pin muxing configuration.
    $ref: pinmux-node.yaml#
    additionalProperties: false
    properties:
      pins: true
      function:
        enum: [gpio,
               # Bank A
               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
               spi1, refclk0,
               # Bank B
               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
      bias-disable: true
      bias-pull-down: true
      bias-pull-up: true
      drive-strength: true
    required:
      - pins
      - function
    allOf:
      - if:
          properties:
            function:
              const: gpio
        then:
          properties:
            pins:
              items: # PA0 - PA28, PB0 - PB22
                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
      - if:
          properties:
            function:
              const: timer0
        then:
          properties:
            pins:
              items:
                enum: [PA0, PA1]
      - if:
          properties:
            function:
              const: timer1
        then:
          properties:
            pins:
              items:
                enum: [PA2, PA3]
      - if:
          properties:
            function:
              const: timer2
        then:
          properties:
            pins:
              items:
                enum: [PA4, PA5]
      - if:
          properties:
            function:
              const: timer5
        then:
          properties:
            pins:
              items:
                enum: [PA6, PA7, PA8, PA9]
      - if:
          properties:
            function:
              const: uart0
        then:
          properties:
            pins:
              items:
                enum: [PA10, PA11]
      - if:
          properties:
            function:
              const: uart1
        then:
          properties:
            pins:
              items:
                enum: [PA12, PA13]
      - if:
          properties:
            function:
              const: can0
        then:
          properties:
            pins:
              items:
                enum: [PA14, PA15]
      - if:
          properties:
            function:
              const: can1
        then:
          properties:
            pins:
              items:
                enum: [PA16, PA17]
      - if:
          properties:
            function:
              const: spi0
        then:
          properties:
            pins:
              items:
                enum: [PA18, PA19, PA20, PA21, PA22]
      - if:
          properties:
            function:
              const: spi1
        then:
          properties:
            pins:
              items:
                enum: [PA23, PA24, PA25, PA26, PA27]
      - if:
          properties:
            function:
              const: refclk0
        then:
          properties:
            pins:
              items:
                enum: [PA28]
      - if:
          properties:
            function:
              const: timer3
        then:
          properties:
            pins:
              items:
                enum: [PB0, PB1]
      - if:
          properties:
            function:
              const: timer4
        then:
          properties:
            pins:
              items:
                enum: [PB2, PB3]
      - if:
          properties:
            function:
              const: timer6
        then:
          properties:
            pins:
              items:
                enum: [PB4, PB5, PB6, PB7]
      - if:
          properties:
            function:
              const: uart2
        then:
          properties:
            pins:
              items:
                enum: [PB8, PB9]
      - if:
          properties:
            function:
              const: can2
        then:
          properties:
            pins:
              items:
                enum: [PB10, PB11]
      - if:
          properties:
            function:
              const: spi2
        then:
          properties:
            pins:
              items:
                enum: [PB12, PB13, PB14, PB15, PB16]
      - if:
          properties:
            function:
              const: spi3
        then:
          properties:
            pins:
              items:
                enum: [PB17, PB18, PB19, PB20, PB21]
      - if:
          properties:
            function:
              const: mclk0
        then:
          properties:
            pins:
              items:
                enum: [PB22]

required:
  - compatible
  - reg

additionalProperties: false