# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/spacemit,k3-combo-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Spacemit K3 PCIE/USB3 Comb PHY

maintainers:
  - Inochi Amaoto <inochiama@gmail.com>

properties:
  compatible:
    const: spacemit,k3-combo-phy

  reg:
    maxItems: 1
 
  "#phy-cells":
    const: 2
    description:
      The first one is phy id, the second one is phy type. This
      only supports types are PCIe and USB .

  spacemit,apb-spare:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to APB SPARE system controller interface, used for
      PHY calibration.

  spacemit,apmu:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle of APMU syscon
          - description: configuration of the PHY lanes
    description: |
      Phandle to control PHY mux configuration. The configuration
      is described as follows:
      bit 4: 0 - PCIe A x8 mode, 1 - PCIe lane share mode
      bit 3: 0 - PCIe A x4 mode, 1 - PCIe A x2 and PCIe B x2 mode
      bit 2: 0 - PCIe C lane 0 is PCIe mode , 1 - USB mode
      bit 1: 0 - PCIe C lane 1 is PCIe mode , 1 - USB mode
      bit 0: 0 - PCIe D lane is PCIe mode , 1 - USB mode
 
      The bit[3:0] is only valid when bit 4 is 1.
 
      This mux control does not affect the PHY for PCIe E, it is always
      in PCIe mode.

required:
  - compatible
  - reg
  - "#phy-cells"
  - spacemit,apb-spare
  - spacemit,apmu

additionalProperties: false

examples:
  - |
    phy@81d00000 {
      compatible = "spacemit,k3-combo-phy";
      reg = <0x81d00000 0x600000>;
      #phy-cells = <2>;
      spacemit,apb-spare = <&apb_spare>;
      spacemit,apmu = <&apmu 0x00>;
    };