# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek High Definition Multimedia Interface (HDMI) PHY

maintainers:
  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
  - Philipp Zabel <p.zabel@pengutronix.de>
  - Chunfeng Yun <chunfeng.yun@mediatek.com>

description: |
  The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
  output and drives the HDMI pads.

properties:
  $nodename:
    pattern: "^hdmi-phy@[0-9a-f]+$"

  compatible:
    oneOf:
      - items:
          - enum:
              - mediatek,mt7623-hdmi-phy
          - const: mediatek,mt2701-hdmi-phy
      - items:
          - enum:
              - mediatek,mt8188-hdmi-phy
          - const: mediatek,mt8195-hdmi-phy
      - const: mediatek,mt2701-hdmi-phy
      - const: mediatek,mt8173-hdmi-phy
      - const: mediatek,mt8195-hdmi-phy

  reg:
    maxItems: 1

  clocks:
    minItems: 1
    items:
      - description: PLL reference clock
      - description: HDMI 26MHz clock
      - description: HDMI PLL1 clock
      - description: HDMI PLL2 clock

  clock-names:
    minItems: 1
    items:
      - const: pll_ref
      - const: 26m
      - const: pll1
      - const: pll2

  clock-output-names:
    maxItems: 1
 
  "#phy-cells":
    const: 0
 
  "#clock-cells":
    const: 0

  mediatek,ibias:
    description:
      TX DRV bias current for < 1.65Gbps
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 63
    default: 0xa

  mediatek,ibias_up:
    description:
      TX DRV bias current for >= 1.65Gbps
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 63
    default: 0x1c

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - clock-output-names
  - "#phy-cells"
  - "#clock-cells"

allOf:
  - if:
      not:
        properties:
          compatible:
            contains:
              const: mediatek,mt8195-hdmi-phy
    then:
      properties:
        clocks:
          maxItems: 1
        clock-names:
          maxItems: 1

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/mt8173-clk.h>
    hdmi_phy: hdmi-phy@10209100 {
        compatible = "mediatek,mt8173-hdmi-phy";
        reg = <0x10209100 0x24>;
        clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
        clock-names = "pll_ref";
        clock-output-names = "hdmitx_dig_cts";
        mediatek,ibias = <0xa>;
        mediatek,ibias_up = <0x1c>;
        #clock-cells = <0>;
        #phy-cells = <0>;
    };

...