# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale i.MX8 SoC series PCIe PHY

maintainers:
  - Richard Zhu <hongxing.zhu@nxp.com>

properties:
  "#phy-cells":
    const: 0

  compatible:
    enum:
      - fsl,imx8mm-pcie-phy
      - fsl,imx8mp-pcie-phy

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    items:
      - const: ref

  resets:
    minItems: 1
    maxItems: 2

  reset-names:
    oneOf:
      - items:          # for iMX8MM
          - const: pciephy
      - items:          # for IMX8MP
          - const: pciephy
          - const: perst

  fsl,refclk-pad-mode:
    description: |
      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
      refclock is derived from SoC internal source), INPUT(PHY refclock
      is provided externally via the refclk pad) or OUTPUT(PHY refclock
      is derived from SoC internal source and provided on the refclk pad).
      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
      to be used.
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 0, 1, 2 ]

  fsl,tx-deemph-gen1:
    description: Gen1 De-emphasis value (optional).
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 0

  fsl,tx-deemph-gen2:
    description: Gen2 De-emphasis value (optional).
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 0

  fsl,clkreq-unsupported:
    type: boolean
    description: A boolean property indicating the CLKREQ# signal is
      not supported in the board design (optional)

  power-domains:
    description: PCIe PHY  power domain (optional).
    maxItems: 1

required:
  - "#phy-cells"
  - compatible
  - reg
  - clocks
  - clock-names
  - fsl,refclk-pad-mode

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/imx8mm-clock.h>
    #include <dt-bindings/phy/phy-imx8-pcie.h>
    #include <dt-bindings/reset/imx8mq-reset.h>
 
    pcie_phy: pcie-phy@32f00000 {
            compatible = "fsl,imx8mm-pcie-phy";
            reg = <0x32f00000 0x10000>;
            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
            clock-names = "ref";
            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
            assigned-clock-rates = <100000000>;
            assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
            resets = <&src IMX8MQ_RESET_PCIEPHY>;
            reset-names = "pciephy";
            fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
            #phy-cells = <0>;
    };
...