Documentation / hwmon / sl28cpld.rst


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
.. SPDX-License-Identifier: GPL-2.0-only

Kernel driver sl28cpld
======================

Supported chips:

   * Kontron sl28cpld

     Prefix: 'sl28cpld'

     Datasheet: not available

Authors: Michael Walle <michael@walle.cc>

Description
-----------

The sl28cpld is a board management controller which also exposes a hardware
monitoring controller. At the moment this controller supports a single fan
supervisor. In the future there might be other flavours and additional
hardware monitoring might be supported.

The fan supervisor has a 7 bit counter register and a counter period of 1
second. If the 7 bit counter overflows, the supervisor will automatically
switch to x8 mode to support a wider input range at the loss of
granularity.

Sysfs entries
-------------

The following attributes are supported.

======================= ========================================================
fan1_input		Fan RPM. Assuming 2 pulses per revolution.
======================= ========================================================