Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 | Kernel driver occ-hwmon ======================= Supported chips: * POWER8 * POWER9 Author: Eddie James <eajames@linux.ibm.com> Description ----------- This driver supports hardware monitoring for the On-Chip Controller (OCC) embedded on POWER processors. The OCC is a device that collects and aggregates sensor data from the processor and the system. The OCC can provide the raw sensor data as well as perform thermal and power management on the system. The P8 version of this driver is a client driver of I2C. It may be probed manually if an "ibm,p8-occ-hwmon" compatible device is found under the appropriate I2C bus node in the device-tree. The P9 version of this driver is a client driver of the FSI-based OCC driver. It will be probed automatically by the FSI-based OCC driver. Sysfs entries ------------- The following attributes are supported. All attributes are read-only unless specified. The OCC sensor ID is an integer that represents the unique identifier of the sensor with respect to the OCC. For example, a temperature sensor for the third DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable to the device driver, which must therefore export the sensor ID as-is. Some entries are only present with certain OCC sensor versions or only on certain OCCs in the system. The version number is not exported to the user but can be inferred. temp[1-n]_label OCC sensor ID. [with temperature sensor version 1] temp[1-n]_input Measured temperature of the component in millidegrees Celsius. [with temperature sensor version >= 2] temp[1-n]_type The FRU (Field Replaceable Unit) type (represented by an integer) for the component that this sensor measures. temp[1-n]_fault Temperature sensor fault boolean; 1 to indicate that a fault is present or 0 to indicate that no fault is present. [with type == 3 (FRU type is VRM)] temp[1-n]_alarm VRM temperature alarm boolean; 1 to indicate alarm, 0 to indicate no alarm [else] temp[1-n]_input Measured temperature of the component in millidegrees Celsius. freq[1-n]_label OCC sensor ID. freq[1-n]_input Measured frequency of the component in MHz. power[1-n]_input Latest measured power reading of the component in microwatts. power[1-n]_average Average power of the component in microwatts. power[1-n]_average_interval The amount of time over which the power average was taken in microseconds. [with power sensor version < 2] power[1-n]_label OCC sensor ID. [with power sensor version >= 2] power[1-n]_label OCC sensor ID + function ID + channel in the form of a string, delimited by underscores, i.e. "0_15_1". Both the function ID and channel are integers that further identify the power sensor. [with power sensor version 0xa0] power[1-n]_label OCC sensor ID + sensor type in the form of a string, delimited by an underscore, i.e. "0_system". Sensor type will be one of "system", "proc", "vdd" or "vdn". For this sensor version, OCC sensor ID will be the same for all power sensors. [present only on "master" OCC; represents the whole system power; only one of this type of power sensor will be present] power[1-n]_label "system" power[1-n]_input Latest system output power in microwatts. power[1-n]_cap Current system power cap in microwatts. power[1-n]_cap_not_redundant System power cap in microwatts when there is not redundant power. power[1-n]_cap_max Maximum power cap that the OCC can enforce in microwatts. power[1-n]_cap_min Minimum power cap that the OCC can enforce in microwatts. power[1-n]_cap_user The power cap set by the user, in microwatts. This attribute will return 0 if no user power cap has been set. This attribute is read-write, but writing any precision below watts will be ignored, i.e. requesting a power cap of 500900000 microwatts will result in a power cap request of 500 watts. [with caps sensor version > 1] power[1-n]_cap_user_source Indicates how the user power cap was set. This is an integer that maps to system or firmware components that can set the user power cap. The following "extn" sensors are exported as a way for the OCC to provide data that doesn't fit anywhere else. The meaning of these sensors is entirely dependent on their data, and cannot be statically defined. extn[1-n]_label ASCII ID or OCC sensor ID. extn[1-n]_flags This is one byte hexadecimal value. Bit 7 indicates the type of the label attribute; 1 for sensor ID, 0 for ASCII ID. Other bits are reserved. extn[1-n]_input 6 bytes of hexadecimal data, with a meaning defined by the sensor ID. |