Based on kernel version 6.19. Page generated on 2026-02-12 08:38 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 |
.. SPDX-License-Identifier: GPL-2.0
Kernel driver mp2925
====================
Supported chips:
* MPS mp2925
Prefix: 'mp2925'
* MPS mp2929
Prefix: 'mp2929'
Author:
Wensheng Wang <wenswang@yeah.net>
Description
-----------
This driver implements support for Monolithic Power Systems, Inc. (MPS)
MP2925 Dual Loop Digital Multi-phase Controller.
Device compliant with:
- PMBus rev 1.3 interface.
The driver exports the following attributes via the 'sysfs' files
for input voltage:
**in1_input**
**in1_label**
**in1_crit**
**in1_crit_alarm**
**in1_lcrit**
**in1_lcrit_alarm**
**in1_max**
**in1_max_alarm**
**in1_min**
**in1_min_alarm**
The driver provides the following attributes for output voltage:
**in2_input**
**in2_label**
**in2_crit**
**in2_crit_alarm**
**in2_lcrit**
**in2_lcrit_alarm**
**in3_input**
**in3_label**
**in3_crit**
**in3_crit_alarm**
**in3_lcrit**
**in3_lcrit_alarm**
The driver provides the following attributes for input current:
**curr1_input**
**curr1_label**
The driver provides the following attributes for output current:
**curr2_input**
**curr2_label**
**curr2_crit**
**curr2_crit_alarm**
**curr2_max**
**curr2_max_alarm**
**curr3_input**
**curr3_label**
**curr3_crit**
**curr3_crit_alarm**
**curr3_max**
**curr3_max_alarm**
The driver provides the following attributes for input power:
**power1_input**
**power1_label**
**power2_input**
**power2_label**
The driver provides the following attributes for output power:
**power3_input**
**power3_label**
**power4_input**
**power4_label**
The driver provides the following attributes for temperature:
**temp1_input**
**temp1_crit**
**temp1_crit_alarm**
**temp1_max**
**temp1_max_alarm**
**temp2_input**
**temp2_crit**
**temp2_crit_alarm**
**temp2_max**
**temp2_max_alarm**
|