Based on kernel version 6.15. Page generated on 2025-05-29 09:09 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 |
.. SPDX-License-Identifier: GPL-2.0
Kernel driver ina233
====================
Supported chips:
* TI INA233
Prefix: 'ina233'
* Datasheet
Publicly available at the TI website : https://www.ti.com/lit/ds/symlink/ina233.pdf
Author: Leo Yang <leo.yang.sy0@gmail.com>
Usage Notes
-----------
The shunt resistor value can be configured by a device tree property;
see Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for details.
Description
-----------
This driver supports hardware monitoring for TI INA233.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
The driver provides the following attributes for input voltage:
**in1_input**
**in1_label**
**in1_max**
**in1_max_alarm**
**in1_min**
**in1_min_alarm**
The driver provides the following attributes for shunt voltage:
**in2_input**
**in2_label**
The driver provides the following attributes for output voltage:
**in3_input**
**in3_label**
**in3_alarm**
The driver provides the following attributes for output current:
**curr1_input**
**curr1_label**
**curr1_max**
**curr1_max_alarm**
The driver provides the following attributes for input power:
**power1_input**
**power1_label**
|