mvebu armada 38x comphy driver
------------------------------

This comphy controller can be found on Marvell Armada 38x. It provides a
number of shared PHYs used by various interfaces (network, sata, usb,
PCIe...).

Required properties:

- compatible: should be "marvell,armada-380-comphy"
- reg: should contain the comphy register location and length.
- #address-cells: should be 1.
- #size-cells: should be 0.

Optional properties:

- reg-names: must be "comphy" as the first name, and "conf".
- reg: must contain the comphy register location and length as the first
    pair, followed by an optional configuration register address and
    length pair.

A sub-node is required for each comphy lane provided by the comphy.

Required properties (child nodes):

- reg: comphy lane number.
- #phy-cells : from the generic phy bindings, must be 1. Defines the
               input port to use for a given comphy lane.

Example:

	comphy: phy@18300 {
		compatible = "marvell,armada-380-comphy";
		reg-names = "comphy", "conf";
		reg = <0x18300 0x100>, <0x18460 4>;
		#address-cells = <1>;
		#size-cells = <0>;

		cpm_comphy0: phy@0 {
			reg = <0>;
			#phy-cells = <1>;
		};

		cpm_comphy1: phy@1 {
			reg = <1>;
			#phy-cells = <1>;
		};
	};