Documentation / devicetree / bindings / mfd / ti,tps6594.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: TI TPS6594 Power Management Integrated Circuit

maintainers:
  - Julien Panis <jpanis@baylibre.com>

description:
  TPS6594 is a Power Management IC which provides regulators and others
  features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
  PFSM (Pre-configurable Finite State Machine) managing the state of the device.
  TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.

properties:
  compatible:
    enum:
      - ti,lp8764-q1
      - ti,tps6593-q1
      - ti,tps6594-q1
      - ti,tps65224-q1

  reg:
    description: I2C slave address or SPI chip select number.
    maxItems: 1

  ti,primary-pmic:
    type: boolean
    description: |
      Identify the primary PMIC on SPMI bus.
      A multi-PMIC synchronization scheme is implemented in the PMIC device
      to synchronize the power state changes with other PMIC devices. This is
      accomplished through a SPMI bus: the primary PMIC is the controller
      device on the SPMI bus, and the secondary PMICs are the target devices
      on the SPMI bus.

  system-power-controller: true

  gpio-controller: true
 
  '#gpio-cells':
    const: 2
    description: |
      The first cell is the pin number, the second cell is used to specify flags.
      See ../gpio/gpio.txt for more information.

  interrupts:
    maxItems: 1

  regulators:
    type: object
    description: List of regulators provided by this controller.

    patternProperties:
      "^buck([1-5]|12|34|123|1234)$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#

        unevaluatedProperties: false
 
      "^ldo[1-4]$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#

        unevaluatedProperties: false

    allOf:
      - if:
          required:
            - buck12
        then:
          properties:
            buck123: false
            buck1234: false
      - if:
          required:
            - buck123
        then:
          properties:
            buck34: false
      - if:
          required:
            - buck1234
        then:
          properties:
            buck34: false

    additionalProperties: false

patternProperties:
  "^buck([1-5]|12|34|123|1234)-supply$":
    description: Input supply phandle for each buck.
 
  "^ldo[1-4]-supply$":
    description: Input supply phandle for each ldo.

required:
  - compatible
  - reg
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        tps6593: pmic@48 {
            compatible = "ti,tps6593-q1";
            reg = <0x48>;
            ti,primary-pmic;
            system-power-controller;
 
            gpio-controller;
            #gpio-cells = <2>;
 
            pinctrl-names = "default";
            pinctrl-0 = <&pmic_irq_pins_default>;
            interrupt-parent = <&mcu_gpio0>;
            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
            buck123-supply = <&vcc_3v3_sys>;
            buck4-supply = <&vcc_3v3_sys>;
            buck5-supply = <&vcc_3v3_sys>;
            ldo1-supply = <&vcc_3v3_sys>;
            ldo2-supply = <&vcc_3v3_sys>;
            ldo3-supply = <&buck5>;
            ldo4-supply = <&vcc_3v3_sys>;
 
            regulators {
                buck123: buck123 {
                    regulator-name = "vcc_core";
                    regulator-min-microvolt = <750000>;
                    regulator-max-microvolt = <850000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                buck4: buck4 {
                    regulator-name = "vcc_1v1";
                    regulator-min-microvolt = <1100000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                buck5: buck5 {
                    regulator-name = "vcc_1v8_sys";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                ldo1: ldo1 {
                    regulator-name = "vddshv5_sdio";
                    regulator-min-microvolt = <3300000>;
                    regulator-max-microvolt = <3300000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                ldo2: ldo2 {
                    regulator-name = "vpp_1v8";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                ldo3: ldo3 {
                    regulator-name = "vcc_0v85";
                    regulator-min-microvolt = <850000>;
                    regulator-max-microvolt = <850000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                ldo4: ldo4 {
                    regulator-name = "vdda_1v8";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
            };
        };
    };