Documentation / devicetree / bindings / mfd / samsung,s5m8767.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung S5M8767 Power Management IC

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>

description: |
  This is a part of device tree bindings for S2M and S5M family of Power
  Management IC (PMIC).
 
  The Samsung S5M8767 is a Power Management IC which includes voltage
  and current regulators, RTC, clock outputs and other sub-blocks.

properties:
  compatible:
    const: samsung,s5m8767-pmic

  clocks:
    $ref: /schemas/clock/samsung,s2mps11.yaml
    description:
      Child node describing clock provider.

  interrupts:
    maxItems: 1

  reg:
    maxItems: 1

  regulators:
    $ref: /schemas/regulator/samsung,s5m8767.yaml
    description:
      List of child nodes that specify the regulators.

  s5m8767,pmic-buck2-dvs-voltage:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 8
    maxItems: 8
    description: |
      A set of 8 voltage values in micro-volt (uV) units for buck2 when
      changing voltage using gpio dvs.

  s5m8767,pmic-buck3-dvs-voltage:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 8
    maxItems: 8
    description: |
      A set of 8 voltage values in micro-volt (uV) units for buck3 when
      changing voltage using gpio dvs.

  s5m8767,pmic-buck4-dvs-voltage:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 8
    maxItems: 8
    description: |
      A set of 8 voltage values in micro-volt (uV) units for buck4 when
      changing voltage using gpio dvs.

  s5m8767,pmic-buck-ds-gpios:
    minItems: 3
    maxItems: 3
    description: |
      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
      It is one-to-one mapped to dvs gpio lines.

  s5m8767,pmic-buck2-uses-gpio-dvs:
    type: boolean
    description: buck2 can be controlled by gpio dvs.

  s5m8767,pmic-buck3-uses-gpio-dvs:
    type: boolean
    description: buck3 can be controlled by gpio dvs.

  s5m8767,pmic-buck4-uses-gpio-dvs:
    type: boolean
    description: buck4 can be controlled by gpio dvs.

  s5m8767,pmic-buck-default-dvs-idx:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minimum: 0
    maximum: 7
    default: 0
    description: |
      Default voltage setting selected from the possible 8 options selectable
      by the dvs gpios. The value of this property should be between 0 and 7.
      If not specified or if out of range, the default value of this property
      is set to 0.

  s5m8767,pmic-buck-dvs-gpios:
    minItems: 3
    maxItems: 3
    description: |
      GPIO specifiers for three host gpio's used for dvs.

  vinb1-supply:
    description: Power supply for buck1
  vinb2-supply:
    description: Power supply for buck2
  vinb3-supply:
    description: Power supply for buck3
  vinb4-supply:
    description: Power supply for buck4
  vinb5-supply:
    description: Power supply for buck5
  vinb6-supply:
    description: Power supply for buck6
  vinb7-supply:
    description: Power supply for buck7
  vinb8-supply:
    description: Power supply for buck8
  vinb9-supply:
    description: Power supply for buck9

  vinl1-supply:
    description: Power supply for LDO3, LDO10, LDO26, LDO27
  vinl2-supply:
    description: Power supply for LDO13, LDO16, LDO25, LDO28
  vinl3-supply:
    description: Power supply for LDO11, LDO14
  vinl4-supply:
    description: Power supply for LDO4, LDO9
  vinl5-supply:
    description: Power supply for LDO12, LDO17, LDO19, LDO23
  vinl6-supply:
    description: Power supply for LDO18, LDO20, LDO21, LDO24
  vinl7-supply:
    description: Power supply for LDO5, LDO22
  vinl8-supply:
    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
  vinl9-supply:
    description: Power supply for LDO2

  wakeup-source: true

required:
  - compatible
  - reg
  - regulators
  - s5m8767,pmic-buck-ds-gpios

dependencies:
  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]

additionalProperties: false

allOf:
  - not:
      required:
        - s5m8767,pmic-buck2-uses-gpio-dvs
        - s5m8767,pmic-buck3-uses-gpio-dvs
  - not:
      required:
        - s5m8767,pmic-buck2-uses-gpio-dvs
        - s5m8767,pmic-buck4-uses-gpio-dvs
  - not:
      required:
        - s5m8767,pmic-buck3-uses-gpio-dvs
        - s5m8767,pmic-buck4-uses-gpio-dvs

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        pmic@66 {
            compatible = "samsung,s5m8767-pmic";
            reg = <0x66>;
 
            interrupt-parent = <&gpx3>;
            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
            pinctrl-names = "default";
            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
            wakeup-source;
 
            s5m8767,pmic-buck-default-dvs-idx = <3>;
            s5m8767,pmic-buck2-uses-gpio-dvs;
 
            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
 
            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
 
            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
                                             <1250000>, <1200000>,
                                             <1150000>, <1100000>,
                                             <1000000>, <950000>;
 
            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
                                             <1100000>, <1100000>,
                                             <1000000>, <1000000>,
                                             <1000000>, <1000000>;
 
            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
                                             <1200000>, <1200000>,
                                             <1200000>, <1200000>,
                                             <1200000>, <1200000>;
 
            clocks {
                compatible = "samsung,s5m8767-clk";
                #clock-cells = <1>;
                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
            };
 
            regulators {
                LDO1 {
                    regulator-name = "VDD_ALIVE";
                    regulator-min-microvolt = <1100000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-always-on;
                    regulator-boot-on;
                    op_mode = <1>; /* Normal Mode */
                };
 
                // ...
 
                BUCK1 {
                    regulator-name = "VDD_MIF";
                    regulator-min-microvolt = <950000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-always-on;
                    regulator-boot-on;
                    op_mode = <1>; /* Normal Mode */
                };
 
                BUCK2 {
                    regulator-name = "VDD_ARM";
                    regulator-min-microvolt = <900000>;
                    regulator-max-microvolt = <1350000>;
                    regulator-always-on;
                    regulator-boot-on;
                    op_mode = <1>; /* Normal Mode */
                };
 
                // ...
            };
        };
    };

  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        pmic@66 {
            compatible = "samsung,s5m8767-pmic";
            reg = <0x66>;
 
            interrupt-parent = <&gpx3>;
            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
            pinctrl-names = "default";
            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
            wakeup-source;
 
            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
 
            clocks {
                compatible = "samsung,s5m8767-clk";
                #clock-cells = <1>;
                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
            };
 
            regulators {
                LDO1 {
                    regulator-name = "VDD_ALIVE";
                    regulator-min-microvolt = <1100000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-always-on;
                    regulator-boot-on;
                    op_mode = <1>; /* Normal Mode */
                };
 
                // ...
            };
        };
    };