Documentation / devicetree / bindings / mfd / maxim,max8998.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/maxim,max8998.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Maxim MAX8998, National/TI LP3974 Power Management IC

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>

description:
  The Maxim MAX8998 is a Power Management IC which includes voltage/current
  regulators, real time clock, battery charging controller and several other
  sub-blocks. It is interfaced using an I2C interface. Each sub-block is
  addressed by the host system using different i2c slave address.

properties:
  compatible:
    enum:
      - maxim,max8998
      - national,lp3974
      - ti,lp3974

  reg:
    maxItems: 1

  interrupts:
    minItems: 1
    items:
      - description: Main interrupt
      - description: Power-on/-off interrupt

  max8998,pmic-buck1-dvs-gpios:
    maxItems: 2
    description:
      Two host gpios used for buck1 DVS.

  max8998,pmic-buck2-dvs-gpio:
    maxItems: 1
    description:
      Host gpio used for buck2 DVS.

  max8998,pmic-buck1-default-dvs-idx:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [0, 1, 2, 3]
    default: 0
    description:
      Default voltage setting selected from the possible 4 options selectable
      by the DVS gpios.

  max8998,pmic-buck2-default-dvs-idx:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [0, 1]
    default: 0
    description:
      Default voltage setting selected from the possible 2 options selectable
      by the DVS GPIOs.

  max8998,pmic-buck-voltage-lock:
    type: boolean
    description:
      If present, disallows changing of preprogrammed buck DVS voltages.

  max8998,pmic-buck1-dvs-voltage:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    maxItems: 4
    description:
      Four voltage values in microvolts for buck1 regulator that can be
      selected using DVS GPIO.

  max8998,pmic-buck2-dvs-voltage:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    maxItems: 2
    description:
      Two voltage values in microvolts for buck2 regulator that can be
      selected using DVS GPIO.

  regulators:
    type: object
    additionalProperties: false

    properties:
      CHARGER:
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false
        description:
          CHARGER is main battery charger current control, wrongly represented
          as regulator.

        properties:
          regulator-min-microamp:
            minimum: 90000
            maximum: 800000

          regulator-max-microamp:
            minimum: 90000
            maximum: 800000

          regulator-min-microvolt: false
          regulator-max-microvolt: false

        required:
          - regulator-name

    patternProperties:
      "^(LDO([2-9]|1[0-7])|BUCK[1-4])$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false

        required:
          - regulator-name
 
      "^(EN32KHz-AP|EN32KHz-CP|ENVICHG|ESAFEOUT[12])$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false
        description: |
          EN32KHz-AP and EN32KHz-CP are 32768 Hz clocks, wrongly represented as
          regulators.
          ENVICHG is a Battery Charging Current Monitor Output.

        properties:
          regulator-min-microvolt: false
          regulator-max-microvolt: false

        required:
          - regulator-name

dependencies:
  max8998,pmic-buck1-dvs-gpios: [ "max8998,pmic-buck1-dvs-voltage" ]
  max8998,pmic-buck2-dvs-gpio: [ "max8998,pmic-buck2-dvs-voltage" ]

required:
  - compatible
  - reg
  - regulators

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        pmic@66 {
            compatible = "national,lp3974";
            reg = <0x66>;
            interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
                                  <&gpx2 7 IRQ_TYPE_LEVEL_LOW>;
            pinctrl-names = "default";
            pinctrl-0 = <&lp3974_irq>;
 
            max8998,pmic-buck1-default-dvs-idx = <0>;
            max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
                                           <&gpx0 6 GPIO_ACTIVE_HIGH>;
            max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
                                             <1100000>, <1000000>;
            max8998,pmic-buck2-default-dvs-idx = <0>;
            max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
            max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
 
            regulators {
                LDO2 {
                    regulator-name = "VALIVE_1.2V";
                    regulator-min-microvolt = <1200000>;
                    regulator-max-microvolt = <1200000>;
                    regulator-always-on;
                };
 
                LDO3 {
                    regulator-name = "VUSB+MIPI_1.1V";
                    regulator-min-microvolt = <1100000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-always-on;
                };
 
                LDO4 {
                    regulator-name = "VADC_3.3V";
                    regulator-min-microvolt = <3300000>;
                    regulator-max-microvolt = <3300000>;
                };
 
                LDO5 {
                    regulator-name = "VTF_2.8V";
                    regulator-min-microvolt = <2800000>;
                    regulator-max-microvolt = <2800000>;
                };
 
                LDO6 {
                    regulator-name = "LDO6";
                    regulator-min-microvolt = <2000000>;
                    regulator-max-microvolt = <2000000>;
                };
 
                LDO7 {
                    regulator-name = "VLCD+VMIPI_1.8V";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                };
 
                LDO8 {
                    regulator-name = "VUSB+VDAC_3.3V";
                    regulator-min-microvolt = <3300000>;
                    regulator-max-microvolt = <3300000>;
                    regulator-always-on;
                };
 
                LDO9 {
                    regulator-name = "VCC_2.8V";
                    regulator-min-microvolt = <2800000>;
                    regulator-max-microvolt = <2800000>;
                    regulator-always-on;
                };
 
                LDO10 {
                    regulator-name = "VPLL_1.1V";
                    regulator-min-microvolt = <1100000>;
                    regulator-max-microvolt = <1100000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                LDO11 {
                    regulator-name = "CAM_AF_3.3V";
                    regulator-min-microvolt = <3300000>;
                    regulator-max-microvolt = <3300000>;
                };
 
                LDO12 {
                    regulator-name = "PS_2.8V";
                    regulator-min-microvolt = <2800000>;
                    regulator-max-microvolt = <2800000>;
                };
 
                LDO13 {
                    regulator-name = "VHIC_1.2V";
                    regulator-min-microvolt = <1200000>;
                    regulator-max-microvolt = <1200000>;
                };
 
                LDO14 {
                    regulator-name = "CAM_I_HOST_1.8V";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                };
 
                LDO15 {
                    regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
                    regulator-min-microvolt = <1200000>;
                    regulator-max-microvolt = <1200000>;
                };
 
                LDO16 {
                    regulator-name = "CAM_S_ANA_2.8V";
                    regulator-min-microvolt = <2800000>;
                    regulator-max-microvolt = <2800000>;
                };
 
                LDO17 {
                    regulator-name = "VCC_3.0V_LCD";
                    regulator-min-microvolt = <3000000>;
                    regulator-max-microvolt = <3000000>;
                };
 
                BUCK1 {
                    regulator-name = "VINT_1.1V";
                    regulator-min-microvolt = <750000>;
                    regulator-max-microvolt = <1500000>;
                    regulator-boot-on;
                    regulator-always-on;
                };
 
                BUCK2 {
                    regulator-name = "VG3D_1.1V";
                    regulator-min-microvolt = <750000>;
                    regulator-max-microvolt = <1500000>;
                    regulator-boot-on;
                };
 
                BUCK3 {
                    regulator-name = "VCC_1.8V";
                    regulator-min-microvolt = <1800000>;
                    regulator-max-microvolt = <1800000>;
                    regulator-always-on;
                };
 
                BUCK4 {
                    regulator-name = "VMEM_1.2V";
                    regulator-min-microvolt = <1200000>;
                    regulator-max-microvolt = <1200000>;
                    regulator-always-on;
                };
 
                EN32KHz-AP {
                    regulator-name = "32KHz AP";
                    regulator-always-on;
                };
 
                EN32KHz-CP {
                    regulator-name = "32KHz CP";
                };
 
                ENVICHG {
                    regulator-name = "VICHG";
                };
 
                ESAFEOUT1 {
                    regulator-name = "SAFEOUT1";
                };
 
                ESAFEOUT2 {
                    regulator-name = "SAFEOUT2";
                    regulator-boot-on;
                };
            };
        };
    };