Documentation / devicetree / bindings / mfd / st,stmpe.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: STMicroelectonics Port Expander (STMPE)

description: STMicroelectronics Port Expander (STMPE) is a series of slow
  bus controllers for various expanded peripherals such as GPIO, keypad,
  touchscreen, ADC, PWM or rotator. It can contain one or several different
  peripherals connected to SPI or I2C.

maintainers:
  - Linus Walleij <linus.walleij@linaro.org>

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#

properties:
  compatible:
    enum:
      - st,stmpe601
      - st,stmpe801
      - st,stmpe811
      - st,stmpe1600
      - st,stmpe1601
      - st,stmpe2401
      - st,stmpe2403

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  vcc-supply: true

  vio-supply: true

  reset-gpios:
    maxItems: 1

  wakeup-source: true

  st,autosleep-timeout:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ]
    description: Time idle before going to automatic sleep to save power

  st,sample-time:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 0, 1, 2, 3, 4, 5, 6 ]
    description: |
      Sample time per iteration
      0 = 36 clock ticks
      1 = 44 clock ticks
      2 = 56 clock ticks
      3 = 64 clock ticks
      4 = 80 clock ticks - recommended
      5 = 96 clock ticks
      6 = 124 clock ticks

  st,mod-12b:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 0, 1 ]
    description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC

  st,ref-sel:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 0, 1 ]
    description: ADC reference source 0 = internal, 1 = external

  st,adc-freq:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 0, 1, 2, 3 ]
    description: |
      ADC clock speed
      0 = 1.625 MHz
      1 = 3.25 MHz
      2, 3 = 6.5 MHz

  adc:
    type: object
    $ref: /schemas/iio/adc/st,stmpe-adc.yaml#

  gpio:
    type: object
    $ref: /schemas/gpio/st,stmpe-gpio.yaml#

  keyboard-controller:
    type: object
    $ref: /schemas/input/matrix-keymap.yaml#

    unevaluatedProperties: false

    properties:
      compatible:
        const: st,stmpe-keypad

      debounce-interval:
        description: Debouncing interval in milliseconds
        $ref: /schemas/types.yaml#/definitions/uint32

      st,no-autorepeat:
        description: If present, the keys will not autorepeat when pressed
        $ref: /schemas/types.yaml#/definitions/flag

      st,scan-count:
        description: Scanning cycles elapsed before key data is updated
        $ref: /schemas/types.yaml#/definitions/uint32

    required:
      - compatible
      - linux,keymap

  pwm:
    type: object
    $ref: /schemas/pwm/pwm.yaml#

    unevaluatedProperties: false

    properties:
      compatible:
        const: st,stmpe-pwm
 
      "#pwm-cells":
        const: 2

  touchscreen:
    type: object
    $ref: /schemas/input/touchscreen/touchscreen.yaml#

    unevaluatedProperties: false

    properties:
      compatible:
        const: st,stmpe-ts

      st,ave-ctrl:
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [ 0, 1, 2, 3 ]
        description: |
          Sample average control
          0 = 1 sample
          1 = 2 samples
          2 = 4 samples
          3 = 8 samples

      st,touch-det-delay:
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
        description: |
          Touch detection delay
          0 = 10 us
          1 = 50 us
          2 = 100 us
          3 = 500 us - recommended
          4 = 1 ms
          5 = 5 ms
          6 = 10 ms
          7 = 50 ms

      st,settling:
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
        description: |
          Panel driver settling time
          0 = 10 us
          1 = 100 us
          2 = 500 us - recommended
          3 = 1 ms
          4 = 5 ms
          5 = 10 ms
          6 = 50 ms
          7 = 100 ms

      st,fraction-z:
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
        description: Length of the fractional part in z, recommended is 7
          (fraction-z ([0..7]) = Count of the fractional part)

      st,i-drive:
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [ 0, 1 ]
        description: |
          current limit value of the touchscreen drivers
          0 = 20 mA (typical 35 mA max)
          1 = 50 mA (typical 80 mA max)

    required:
      - compatible

additionalProperties: false

required:
  - compatible
  - reg
  - interrupts

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/input/input.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      port-expander@43 {
        compatible = "st,stmpe2401";
        reg = <0x43>;
        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
        interrupt-parent = <&gpio>;
        vcc-supply = <&db8500_vsmps2_reg>;
        vio-supply = <&db8500_vsmps2_reg>;
        wakeup-source;
        st,autosleep-timeout = <1024>;
 
        gpio {
          compatible = "st,stmpe-gpio";
          gpio-controller;
          #gpio-cells = <2>;
          interrupt-controller;
          #interrupt-cells = <2>;
          st,norequest-mask = <0xf0f002>;
        };
 
        keyboard-controller {
          compatible = "st,stmpe-keypad";
          debounce-interval = <64>;
          st,scan-count = <8>;
          st,no-autorepeat;
          keypad,num-rows = <8>;
          keypad,num-columns = <8>;
          linux,keymap = <
              MATRIX_KEY(0x00, 0x00, KEY_1)
              MATRIX_KEY(0x00, 0x01, KEY_2)
              MATRIX_KEY(0x00, 0x02, KEY_3)
              MATRIX_KEY(0x00, 0x03, KEY_4)
              MATRIX_KEY(0x00, 0x04, KEY_5)
              MATRIX_KEY(0x00, 0x05, KEY_6)
              MATRIX_KEY(0x00, 0x06, KEY_7)
              MATRIX_KEY(0x00, 0x07, KEY_8)
              MATRIX_KEY(0x00, 0x08, KEY_9)
              MATRIX_KEY(0x00, 0x09, KEY_0)
          >;
        };
 
        pwm {
          compatible = "st,stmpe-pwm";
          #pwm-cells = <2>;
        };
      };
 
      port-expander@41 {
        compatible = "st,stmpe811";
        reg = <0x41>;
        interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
        interrupt-parent = <&gpio>;
        st,adc-freq = <1>;
        st,mod-12b = <1>;
        st,ref-sel = <0>;
        st,sample-time = <4>;
 
        adc {
          compatible = "st,stmpe-adc";
          st,norequest-mask = <0x0f>;
          #io-channel-cells = <1>;
        };
 
        gpio {
          compatible = "st,stmpe-gpio";
          gpio-controller;
          #gpio-cells = <2>;
          interrupt-controller;
          #interrupt-cells = <2>;
        };
 
        pwm {
          compatible = "st,stmpe-pwm";
          #pwm-cells = <2>;
        };
 
        touchscreen {
          compatible = "st,stmpe-ts";
          st,ave-ctrl = <3>;
          st,touch-det-delay = <5>;
          st,settling = <3>;
          st,fraction-z = <7>;
          st,i-drive = <1>;
        };
      };
    };
...