Based on kernel version 6.19. Page generated on 2026-02-12 08:38 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/mfd/nxp,pf1550.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP PF1550 Power Management IC maintainers: - Samuel Kayode <samuel.kayode@savoirfairelinux.com> description: PF1550 PMIC provides battery charging and power supply for low power IoT and wearable applications. This device consists of an i2c controlled MFD that includes regulators, battery charging and an onkey/power button. $ref: /schemas/power/supply/power-supply.yaml properties: compatible: const: nxp,pf1550 reg: maxItems: 1 interrupts: maxItems: 1 wakeup-source: true regulators: type: object additionalProperties: false patternProperties: "^(ldo[1-3]|sw[1-3]|vrefddr)$": type: object $ref: /schemas/regulator/regulator.yaml description: regulator configuration for ldo1-3, buck converters(sw1-3) and DDR termination reference voltage (vrefddr) unevaluatedProperties: false monitored-battery: description: | A phandle to a monitored battery node that contains a valid value for: constant-charge-voltage-max-microvolt. nxp,thermal-regulation-celsius: description: Temperature threshold for thermal regulation of charger in celsius. enum: [ 80, 95, 110, 125 ] nxp,min-system-microvolt: description: System specific lower limit voltage. enum: [ 3500000, 3700000, 4300000 ] nxp,disable-key-power: type: boolean description: Disable power-down using a long key-press. The onkey driver will remove support for the KEY_POWER key press when triggered using a long press of the onkey. required: - compatible - reg - interrupts unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> battery: battery-cell { compatible = "simple-battery"; constant-charge-voltage-max-microvolt = <4400000>; }; i2c { #address-cells = <1>; #size-cells = <0>; pmic@8 { compatible = "nxp,pf1550"; reg = <0x8>; interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; wakeup-source; monitored-battery = <&battery>; nxp,min-system-microvolt = <4300000>; nxp,thermal-regulation-celsius = <80>; regulators { sw1_reg: sw1 { regulator-name = "sw1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1387500>; regulator-always-on; regulator-ramp-delay = <6250>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-min-microvolt = <1270000>; }; }; sw2_reg: sw2 { regulator-name = "sw2"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1387500>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; sw3_reg: sw3 { regulator-name = "sw3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; vldo1_reg: ldo1 { regulator-name = "ldo1"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; vldo2_reg: ldo2 { regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vldo3_reg: ldo3 { regulator-name = "ldo3"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; |