Documentation / devicetree / bindings / mfd / cirrus,lochnagar.yaml


Based on kernel version 6.9. Page generated on 2024-05-14 10:02 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cirrus Logic Lochnagar Audio Development Board

maintainers:
  - patches@opensource.cirrus.com

description: |
  Lochnagar is an evaluation and development board for Cirrus Logic
  Smart CODEC and Amp devices. It allows the connection of most Cirrus
  Logic devices on mini-cards, as well as allowing connection of
  various application processor systems to provide a full evaluation
  platform.  Audio system topology, clocking and power can all be
  controlled through the Lochnagar, allowing the device under test
  to be used in a variety of possible use cases.
 
  Also see these documents for generic binding information:
    [1] GPIO : ../gpio/gpio.txt
 
  And these for relevant defines:
    [2] include/dt-bindings/pinctrl/lochnagar.h
    [3] include/dt-bindings/clock/lochnagar.h
 
  And these documents for the required sub-node binding details:
    [4] Clock: ../clock/cirrus,lochnagar.yaml
    [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
    [6] Sound: ../sound/cirrus,lochnagar.yaml
    [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml

allOf:
  - if:
      properties:
        compatible:
          enum:
            - cirrus,lochnagar2
    then:
      properties:
        lochnagar-hwmon:
          type: object
          $ref: /schemas/hwmon/cirrus,lochnagar.yaml#

        lochnagar-sc:
          type: object
          $ref: /schemas/sound/cirrus,lochnagar.yaml#

properties:
  compatible:
    enum:
      - cirrus,lochnagar1
      - cirrus,lochnagar2

  reg:
    const: 0x22

  reset-gpios:
    maxItems: 1

  present-gpios:
    description: |
      Host present line, indicating the presence of a
      host system, see [1]. This can be omitted if the present line is
      tied in hardware.
    maxItems: 1

  lochnagar-clk:
    type: object
    $ref: /schemas/clock/cirrus,lochnagar.yaml#

  lochnagar-pmic32k:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 32768

  lochnagar-clk12m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 12288000

  lochnagar-clk11m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 11298600

  lochnagar-clk24m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 24576000

  lochnagar-clk22m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 22579200

  lochnagar-clk8m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 8192000

  lochnagar-usb24m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 24576000

  lochnagar-usb12m:
    type: object
    $ref: /schemas/clock/fixed-clock.yaml#
    properties:
      clock-frequency:
        const: 12288000

  pinctrl:
    type: object
    $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#

  lochnagar-hwmon:
    type: object
    $ref: /schemas/hwmon/cirrus,lochnagar.yaml#

  lochnagar-sc:
    type: object
    $ref: /schemas/sound/cirrus,lochnagar.yaml#

  VDDCORE:
    description:
      Initialisation data for the VDDCORE regulator, which supplies the
      CODECs digital core if not being provided by an internal regulator.
    type: object
    $ref: /schemas/regulator/regulator.yaml#
    unevaluatedProperties: false
    properties:
      compatible:
        enum:
          - cirrus,lochnagar2-vddcore

      SYSVDD-supply:
        description:
          Primary power supply for the Lochnagar.
    required:
      - compatible

  MICVDD:
    description:
      Initialisation data for the MICVDD regulator, which supplies the
      CODECs MICVDD.
    type: object
    $ref: /schemas/regulator/regulator.yaml#
    unevaluatedProperties: false
    properties:
      compatible:
        enum:
          - cirrus,lochnagar2-micvdd

      SYSVDD-supply:
        description:
          Primary power supply for the Lochnagar.
    required:
      - compatible

  MIC1VDD:
    description:
      Initialisation data for the MIC1VDD supplies.
    type: object
    $ref: /schemas/regulator/regulator.yaml#
    unevaluatedProperties: false
    properties:
      compatible:
        enum:
          - cirrus,lochnagar2-mic1vdd

      cirrus,micbias-input:
        description:
          A property selecting which of the CODEC minicard micbias outputs
          should be used.
        $ref: /schemas/types.yaml#/definitions/uint32
        minimum: 1
        maximum: 4

      MICBIAS1-supply:
        description:
          Regulator supplies for the MIC1VDD outputs, supplying the digital
          microphones, normally supplied from the attached CODEC.
    required:
      - compatible

  MIC2VDD:
    description:
      Initialisation data for the MIC2VDD supplies.
    type: object
    $ref: /schemas/regulator/regulator.yaml#
    unevaluatedProperties: false
    properties:
      compatible:
        enum:
          - cirrus,lochnagar2-mic2vdd

      cirrus,micbias-input:
        description:
          A property selecting which of the CODEC minicard micbias outputs
          should be used.
        $ref: /schemas/types.yaml#/definitions/uint32
        minimum: 1
        maximum: 4

      MICBIAS2-supply:
        description:
          Regulator supplies for the MIC2VDD outputs, supplying the digital
          microphones, normally supplied from the attached CODEC.
    required:
      - compatible

  VDD1V8:
    description:
      Recommended fixed regulator for the VDD1V8 regulator, which supplies
      the CODECs analog and 1.8V digital supplies.
    type: object
    $ref: /schemas/regulator/regulator.yaml#
    unevaluatedProperties: false
    properties:
      compatible:
        enum:
          - regulator-fixed

      regulator-min-microvolt:
        const: 1800000

      regulator-max-microvolt:
        const: 1800000

      vin-supply:
        description:
          Should be set to same supply as SYSVDD
    required:
      - compatible
      - regulator-min-microvolt
      - regulator-max-microvolt
      - regulator-boot-on
      - regulator-always-on
      - vin-supply

required:
  - compatible
  - reg
  - reset-gpios
  - lochnagar-clk
  - pinctrl

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/lochnagar.h>
    #include <dt-bindings/pinctrl/lochnagar.h>
    i2c@e0004000 {
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0xe0004000 0x1000>;
 
        lochnagar: lochnagar@22 {
            compatible = "cirrus,lochnagar2";
            reg = <0x22>;
 
            reset-gpios = <&gpio0 55 0>;
            present-gpios = <&gpio0 60 0>;
 
            lochnagarclk: lochnagar-clk {
                compatible = "cirrus,lochnagar2-clk";
 
                #clock-cells = <1>;
                clocks = <&clkaudio>, <&clkpmic>;
                clock-names = "ln-gf-mclk2", "ln-pmic-32k";
 
                assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
                                  <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
                assigned-clock-parents = <&clkaudio>, <&clkpmic>;
            };
 
            clkpmic: lochnagar-pmic32k {
                compatible = "fixed-clock";
                #clock-cells = <0>;
                clock-frequency = <32768>;
            };
 
            pinctrl {
                compatible = "cirrus,lochnagar-pinctrl";
 
                gpio-controller;
                #gpio-cells = <2>;
                gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
 
                pinctrl-names = "default";
                pinctrl-0 = <&pinsettings>;
 
                pinsettings: pin-settings {
                    ap2aif-pins {
                        input-enable;
                        groups = "gf-aif1";
                        function = "codec-aif3";
                    };
                    codec2aif-pins {
                        output-enable;
                        groups = "codec-aif3";
                        function = "gf-aif1";
                    };
                };
            };
 
            lochnagar-sc {
                compatible = "cirrus,lochnagar2-soundcard";
 
                #sound-dai-cells = <1>;
 
                clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
                clock-names = "mclk";
            };
 
            lochnagar-hwmon {
                compatible = "cirrus,lochnagar2-hwmon";
            };
 
            MIC1VDD {
                compatible = "cirrus,lochnagar2-mic1vdd";
 
                cirrus,micbias-input = <3>;
            };
 
            MICVDD {
                compatible = "cirrus,lochnagar2-micvdd";
 
                SYSVDD-supply = <&wallvdd>;
 
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
            };
 
            VDD1V8 {
                compatible = "regulator-fixed";
 
                regulator-name = "VDD1V8";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
                regulator-boot-on;
                regulator-always-on;
 
                vin-supply = <&wallvdd>;
            };
        };
    };