Documentation / devicetree / bindings / mfd / kontron,sl28cpld.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Kontron's sl28cpld board management controller

maintainers:
  - Michael Walle <michael@walle.cc>

description: |
  The board management controller may contain different IP blocks like
  watchdog, fan monitoring, PWM controller, interrupt controller and a
  GPIO controller.

properties:
  compatible:
    const: kontron,sl28cpld

  reg:
    description:
      I2C device address.
    maxItems: 1
 
  "#address-cells":
    const: 1
 
  "#size-cells":
    const: 0
 
  "#interrupt-cells":
    const: 2

  interrupts:
    maxItems: 1

  interrupt-controller: true

patternProperties:
  "^gpio(@[0-9a-f]+)?$":
    $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
 
  "^hwmon(@[0-9a-f]+)?$":
    $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
 
  "^interrupt-controller(@[0-9a-f]+)?$":
    $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
 
  "^pwm(@[0-9a-f]+)?$":
    $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
 
  "^watchdog(@[0-9a-f]+)?$":
    $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml

required:
  - "#address-cells"
  - "#size-cells"
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        sl28cpld@4a {
            compatible = "kontron,sl28cpld";
            reg = <0x4a>;
            #address-cells = <1>;
            #size-cells = <0>;
 
            watchdog@4 {
                compatible = "kontron,sl28cpld-wdt";
                reg = <0x4>;
                kontron,assert-wdt-timeout-pin;
            };
 
            hwmon@b {
                compatible = "kontron,sl28cpld-fan";
                reg = <0xb>;
            };
 
            pwm@c {
                compatible = "kontron,sl28cpld-pwm";
                reg = <0xc>;
                #pwm-cells = <2>;
            };
 
            pwm@e {
                compatible = "kontron,sl28cpld-pwm";
                reg = <0xe>;
                #pwm-cells = <2>;
            };
 
            gpio@10 {
                compatible = "kontron,sl28cpld-gpio";
                reg = <0x10>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;
 
                gpio-controller;
                #gpio-cells = <2>;
                gpio-line-names = "a", "b", "c";
 
                interrupt-controller;
                #interrupt-cells = <2>;
            };
 
            gpio@15 {
                compatible = "kontron,sl28cpld-gpio";
                reg = <0x15>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;
 
                gpio-controller;
                #gpio-cells = <2>;
 
                interrupt-controller;
                #interrupt-cells = <2>;
            };
 
            gpio@1a {
                compatible = "kontron,sl28cpld-gpo";
                reg = <0x1a>;
 
                gpio-controller;
                #gpio-cells = <2>;
            };
 
            gpio@1b {
                compatible = "kontron,sl28cpld-gpi";
                reg = <0x1b>;
 
                gpio-controller;
                #gpio-cells = <2>;
            };
 
            interrupt-controller@1c {
                compatible = "kontron,sl28cpld-intc";
                reg = <0x1c>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;
 
                interrupt-controller;
                #interrupt-cells = <2>;
            };
        };
    };