# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/aspeed,dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Aspeed SuperSpeed DWC3 USB SoC controller

maintainers:
  - Ryan Chen <ryan_chen@aspeedtech.com>

description:
  The common content of the node is defined in snps,dwc3.yaml.

select:
  properties:
    compatible:
      contains:
        const: aspeed,ast2700-xhci
  required:
    - compatible

properties:
  compatible:
    items:
      - const: aspeed,ast2700-xhci
      - const: snps,dwc3

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: Controller bus early clock
      - description: PHY reference clock
      - description: Controller suspend clock

  clock-names:
    items:
      - const: bus_early
      - const: ref
      - const: suspend

  resets:
    maxItems: 1

  phys:
    maxItems: 1

  phy-names:
    const: usb3-phy

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - resets
  - phys
  - phy-names

allOf:
  - $ref: snps,dwc3.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/aspeed,ast2700-scu.h>
    #include <dt-bindings/reset/aspeed,ast2700-scu.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
    bus {
        #address-cells = <2>;
        #size-cells = <2>;
 
        usb@12030000 {
            compatible = "aspeed,ast2700-xhci", "snps,dwc3";
            reg = <0x0 0x12030000 0x0 0x10000>;
            interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
            clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>,
                     <&syscon0 SCU0_CLK_U2PHY_REFCLK>,
                     <&syscon0 SCU0_CLK_U2PHY_CLK12M>;
            clock-names = "bus_early", "ref", "suspend";
            resets = <&syscon0 SCU0_RESET_PORTA_XHCI>;
            pinctrl-names = "default";
            pinctrl-0 = <&pinctrl_usb3axh_default &pinctrl_usb2axh_default>;
            phys = <&uphy3a>;
            phy-names = "usb3-phy";
            dr_mode = "host";
        };
    };