# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/ti,dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Texas Instruments OMAP DWC3 USB Glue Layer

maintainers:
  - Felipe Balbi <balbi@ti.com>

description:
  Texas Instruments glue layer for Synopsys DesignWare USB3 (DWC3)
  controller on OMAP and AM43xx SoCs. Manages SoC-specific integration
  including register mapping, interrupt routing, UTMI/PIPE interface mode
  selection (HW/SW), and child DWC3 core instantiation via address space
  translation. Supports both legacy single-instance and multi-instance
  (numbered) configurations.

properties:
  compatible:
    enum:
      - ti,dwc3
      - ti,am437x-dwc3

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  utmi-mode:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Controls the source of UTMI/PIPE status for VBUS and OTG ID.
      1 for HW mode, 2 for SW mode.
    enum: [1, 2]
 
  "#address-cells":
    const: 1
 
  "#size-cells":
    const: 1

  ranges: true

  extcon:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle for the extcon device used to detect connect/
      disconnect events.

  vbus-supply:
    description: Phandle to the regulator device tree node if needed.

patternProperties:
  "^usb@[0-9a-f]+$":
    type: object
    $ref: snps,dwc3.yaml#
    unevaluatedProperties: false

required:
  - reg
  - compatible
  - interrupts
  - "#address-cells"
  - "#size-cells"
  - utmi-mode
  - ranges

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    omap_dwc3_1@0 {
        compatible = "ti,dwc3";
        reg = <0x0 0x10000>;
        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
        #address-cells = <1>;
        #size-cells = <1>;
        utmi-mode = <2>;
        ranges = <0 0 0x20000>;
 
        usb@10000 {
            compatible = "snps,dwc3";
            reg = <0x10000 0x17000>;
            interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "peripheral", "host", "otg";
            phys = <&usb2_phy1>, <&usb3_phy1>;
            phy-names = "usb2-phy", "usb3-phy";
            maximum-speed = "super-speed";
            dr_mode = "otg";
            snps,dis_u3_susphy_quirk;
            snps,dis_u2_susphy_quirk;
        };
    };
...