Documentation / devicetree / bindings / usb / generic-ohci.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: USB OHCI Controller

maintainers:
  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - allwinner,sun4i-a10-ohci
              - allwinner,sun50i-a64-ohci
              - allwinner,sun50i-h6-ohci
              - allwinner,sun50i-h616-ohci
              - allwinner,sun5i-a13-ohci
              - allwinner,sun6i-a31-ohci
              - allwinner,sun7i-a20-ohci
              - allwinner,sun8i-a23-ohci
              - allwinner,sun8i-a83t-ohci
              - allwinner,sun8i-h3-ohci
              - allwinner,sun8i-r40-ohci
              - allwinner,sun8i-v3s-ohci
              - allwinner,sun9i-a80-ohci
              - allwinner,sun20i-d1-ohci
              - brcm,bcm3384-ohci
              - brcm,bcm63268-ohci
              - brcm,bcm6328-ohci
              - brcm,bcm6358-ohci
              - brcm,bcm6362-ohci
              - brcm,bcm6368-ohci
              - brcm,bcm7125-ohci
              - brcm,bcm7346-ohci
              - brcm,bcm7358-ohci
              - brcm,bcm7360-ohci
              - brcm,bcm7362-ohci
              - brcm,bcm7420-ohci
              - brcm,bcm7425-ohci
              - brcm,bcm7435-ohci
              - hpe,gxp-ohci
              - ibm,476gtr-ohci
              - ingenic,jz4740-ohci
              - rockchip,rk3588-ohci
              - snps,hsdk-v1.0-ohci
          - const: generic-ohci
      - enum:
          - generic-ohci
          - ti,ohci-omap3
      - items:
          - enum:
              - cavium,octeon-6335-ohci
              - nintendo,hollywood-usb-ohci
              - nxp,ohci-nxp
              - st,spear600-ohci
          - const: usb-ohci

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  resets:
    minItems: 1
    maxItems: 2

  clocks:
    minItems: 1
    maxItems: 4
    description: |
      In case the Renesas R-Car Gen3 SoCs:
        - if a host only channel: first clock should be host.
        - if a USB DRD channel: first clock should be host and second
          one should be peripheral

  power-domains:
    maxItems: 1

  big-endian:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set this flag for HCDs with big endian descriptors and big
      endian registers.

  big-endian-desc:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set this flag for HCDs with big endian descriptors.

  big-endian-regs:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set this flag for HCDs with big endian registers.

  remote-wakeup-connected:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Remote wakeup is wired on the platform.

  no-big-frame-no:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Set if frame_no lives in bits [15:0] of HCCA

  num-ports:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Overrides the detected port count

  phys:
    minItems: 1
    maxItems: 3

  phy-names:
    const: usb

  iommus:
    maxItems: 1

  dr_mode:
    enum:
      - host
      - otg

  transceiver:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      The associated ISP1301 device. Necessary for the UDC controller for
      connecting to the USB physical layer.

required:
  - compatible
  - reg
  - interrupts

allOf:
  - $ref: usb-hcd.yaml
  - if:
      not:
        properties:
          compatible:
            contains:
              const: nxp,ohci-nxp
    then:
      properties:
        transceiver: false
  - if:
      properties:
        compatible:
          contains:
            const: rockchip,rk3588-ohci
    then:
      properties:
        clocks:
          minItems: 4
    else:
      properties:
        clocks:
          minItems: 1
          maxItems: 3

unevaluatedProperties: false

examples:
  - |
      ohci0: usb@1c14400 {
          compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
          reg = <0x01c14400 0x100>;
          interrupts = <64>;
          clocks = <&usb_clk 6>, <&ahb_gates 2>;
          phys = <&usbphy 1>;
          phy-names = "usb";
      };
 
...