Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTIDE010 PATA controller maintainers: - Linus Walleij <linus.walleij@linaro.org> description: | This controller is the first Faraday IDE interface block, used in the StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini platform. The controller can do PIO modes 0 through 4, Multi-word DMA (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6. On the Gemini platform, this PATA block is accompanied by a PATA to SATA bridge in order to support SATA. This is why a phandle to that controller is compulsory on that platform. The timing properties are unique per-SoC, not per-board. properties: compatible: oneOf: - const: faraday,ftide010 - items: - const: cortina,gemini-pata - const: faraday,ftide010 reg: maxItems: 1 interrupts: maxItems: 1 clocks: minItems: 1 clock-names: const: PCLK sata: description: phandle to the Gemini PATA to SATA bridge, if available $ref: /schemas/types.yaml#/definitions/phandle required: - compatible - reg - interrupts allOf: - $ref: pata-common.yaml# - if: properties: compatible: contains: const: cortina,gemini-pata then: required: - sata unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/cortina,gemini-clock.h> ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x100>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; clocks = <&gcc GEMINI_CLK_GATE_IDE>; clock-names = "PCLK"; sata = <&sata>; #address-cells = <1>; #size-cells = <0>; ide-port@0 { reg = <0>; }; ide-port@1 { reg = <1>; }; }; ... |