# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Calxeda AHCI SATA Controller

description: |
  The Calxeda SATA controller mostly conforms to the AHCI interface
  with some special extensions to add functionality, to map GPIOs for
  activity LEDs and for mapping the ComboPHYs.

maintainers:
  - Andre Przywara <andre.przywara@arm.com>

properties:
  compatible:
    const: calxeda,hb-ahci

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  dma-coherent: true

  calxeda,pre-clocks:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      Indicates the number of additional clock cycles to transmit before
      sending an SGPIO pattern.

  calxeda,post-clocks:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      Indicates the number of additional clock cycles to transmit after
      sending an SGPIO pattern.

  calxeda,led-order:
    description: Maps port numbers to offsets within the SGPIO bitstream.
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 8

  calxeda,port-phys:
    description: |
      phandle-combophy and lane assignment, which maps each SATA port to a
      combophy and a lane within that combophy
    $ref: /schemas/types.yaml#/definitions/phandle-array
    minItems: 1
    maxItems: 8
    items:
      maxItems: 2

  calxeda,tx-atten:
    description: |
      Contains TX attenuation override codes, one per port.
      The upper 24 bits of each entry are always 0 and thus ignored.
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 8

  calxeda,sgpio-gpio:
    maxItems: 3
    description: |
      phandle-gpio bank, bit offset, and default on or off, which indicates
      that the driver supports SGPIO indicator lights using the indicated
      GPIOs.

required:
  - compatible
  - reg
  - interrupts

additionalProperties: false

examples:
  - |
    sata@ffe08000 {
        compatible = "calxeda,hb-ahci";
        reg = <0xffe08000 0x1000>;
        interrupts = <115>;
        dma-coherent;
        calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
                             <&combophy0 2>, <&combophy0 3>;
        calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
        calxeda,led-order = <4 0 1 2 3>;
        calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
        calxeda,pre-clocks = <10>;
        calxeda,post-clocks = <0>;
    };

...