Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 | .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> =============================== Universal TUN/TAP device driver =============================== Copyright |copy| 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> Linux, Solaris drivers Copyright |copy| 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> FreeBSD TAP driver Copyright |copy| 1999-2000 Maksim Yevmenkin <m_evmenkin@yahoo.com> Revision of this document 2002 by Florian Thiel <florian.thiel@gmx.net> 1. Description ============== TUN/TAP provides packet reception and transmission for user space programs. It can be seen as a simple Point-to-Point or Ethernet device, which, instead of receiving packets from physical media, receives them from user space program and instead of sending packets via physical media writes them to the user space program. In order to use the driver a program has to open /dev/net/tun and issue a corresponding ioctl() to register a network device with the kernel. A network device will appear as tunXX or tapXX, depending on the options chosen. When the program closes the file descriptor, the network device and all corresponding routes will disappear. Depending on the type of device chosen the userspace program has to read/write IP packets (with tun) or ethernet frames (with tap). Which one is being used depends on the flags given with the ioctl(). The package from http://vtun.sourceforge.net/tun contains two simple examples for how to use tun and tap devices. Both programs work like a bridge between two network interfaces. br_select.c - bridge based on select system call. br_sigio.c - bridge based on async io and SIGIO signal. However, the best example is VTun http://vtun.sourceforge.net :)) 2. Configuration ================ Create device node:: mkdir /dev/net (if it doesn't exist already) mknod /dev/net/tun c 10 200 Set permissions:: e.g. chmod 0666 /dev/net/tun There's no harm in allowing the device to be accessible by non-root users, since CAP_NET_ADMIN is required for creating network devices or for connecting to network devices which aren't owned by the user in question. If you want to create persistent devices and give ownership of them to unprivileged users, then you need the /dev/net/tun device to be usable by those users. Driver module autoloading Make sure that "Kernel module loader" - module auto-loading support is enabled in your kernel. The kernel should load it on first access. Manual loading insert the module by hand:: modprobe tun If you do it the latter way, you have to load the module every time you need it, if you do it the other way it will be automatically loaded when /dev/net/tun is being opened. 3. Program interface ==================== 3.1 Network device allocation ----------------------------- ``char *dev`` should be the name of the device with a format string (e.g. "tun%d"), but (as far as I can see) this can be any valid network device name. Note that the character pointer becomes overwritten with the real device name (e.g. "tun0"):: #include <linux/if.h> #include <linux/if_tun.h> int tun_alloc(char *dev) { struct ifreq ifr; int fd, err; if( (fd = open("/dev/net/tun", O_RDWR)) < 0 ) return tun_alloc_old(dev); memset(&ifr, 0, sizeof(ifr)); /* Flags: IFF_TUN - TUN device (no Ethernet headers) * IFF_TAP - TAP device * * IFF_NO_PI - Do not provide packet information */ ifr.ifr_flags = IFF_TUN; if( *dev ) strscpy_pad(ifr.ifr_name, dev, IFNAMSIZ); if( (err = ioctl(fd, TUNSETIFF, (void *) &ifr)) < 0 ){ close(fd); return err; } strcpy(dev, ifr.ifr_name); return fd; } 3.2 Frame format ---------------- If flag IFF_NO_PI is not set each frame format is:: Flags [2 bytes] Proto [2 bytes] Raw protocol(IP, IPv6, etc) frame. 3.3 Multiqueue tuntap interface ------------------------------- From version 3.8, Linux supports multiqueue tuntap which can uses multiple file descriptors (queues) to parallelize packets sending or receiving. The device allocation is the same as before, and if user wants to create multiple queues, TUNSETIFF with the same device name must be called many times with IFF_MULTI_QUEUE flag. ``char *dev`` should be the name of the device, queues is the number of queues to be created, fds is used to store and return the file descriptors (queues) created to the caller. Each file descriptor were served as the interface of a queue which could be accessed by userspace. :: #include <linux/if.h> #include <linux/if_tun.h> int tun_alloc_mq(char *dev, int queues, int *fds) { struct ifreq ifr; int fd, err, i; if (!dev) return -1; memset(&ifr, 0, sizeof(ifr)); /* Flags: IFF_TUN - TUN device (no Ethernet headers) * IFF_TAP - TAP device * * IFF_NO_PI - Do not provide packet information * IFF_MULTI_QUEUE - Create a queue of multiqueue device */ ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE; strcpy(ifr.ifr_name, dev); for (i = 0; i < queues; i++) { if ((fd = open("/dev/net/tun", O_RDWR)) < 0) goto err; err = ioctl(fd, TUNSETIFF, (void *)&ifr); if (err) { close(fd); goto err; } fds[i] = fd; } return 0; err: for (--i; i >= 0; i--) close(fds[i]); return err; } A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were enabled by default after it was created through TUNSETIFF. fd is the file descriptor (queue) that we want to enable or disable, when enable is true we enable it, otherwise we disable it:: #include <linux/if.h> #include <linux/if_tun.h> int tun_set_queue(int fd, int enable) { struct ifreq ifr; memset(&ifr, 0, sizeof(ifr)); if (enable) ifr.ifr_flags = IFF_ATTACH_QUEUE; else ifr.ifr_flags = IFF_DETACH_QUEUE; return ioctl(fd, TUNSETQUEUE, (void *)&ifr); } Universal TUN/TAP device driver Frequently Asked Question ========================================================= 1. What platforms are supported by TUN/TAP driver ? Currently driver has been written for 3 Unices: - Linux kernels 2.2.x, 2.4.x - FreeBSD 3.x, 4.x, 5.x - Solaris 2.6, 7.0, 8.0 2. What is TUN/TAP driver used for? As mentioned above, main purpose of TUN/TAP driver is tunneling. It is used by VTun (http://vtun.sourceforge.net). Another interesting application using TUN/TAP is pipsecd (http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec implementation that can use complete kernel routing (unlike FreeS/WAN). 3. How does Virtual network device actually work ? Virtual network device can be viewed as a simple Point-to-Point or Ethernet device, which instead of receiving packets from a physical media, receives them from user space program and instead of sending packets via physical media sends them to the user space program. Let's say that you configured IPv6 on the tap0, then whenever the kernel sends an IPv6 packet to tap0, it is passed to the application (VTun for example). The application encrypts, compresses and sends it to the other side over TCP or UDP. The application on the other side decompresses and decrypts the data received and writes the packet to the TAP device, the kernel handles the packet like it came from real physical device. 4. What is the difference between TUN driver and TAP driver? TUN works with IP frames. TAP works with Ethernet frames. This means that you have to read/write IP packets when you are using tun and ethernet frames when using tap. 5. What is the difference between BPF and TUN/TAP driver? BPF is an advanced packet filter. It can be attached to existing network interface. It does not provide a virtual network interface. A TUN/TAP driver does provide a virtual network interface and it is possible to attach BPF to this interface. 6. Does TAP driver support kernel Ethernet bridging? Yes. Linux and FreeBSD drivers support Ethernet bridging. |