# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: SBS compliant battery

maintainers:
  - Sebastian Reichel <sre@kernel.org>

description: |
  Battery compatible with the smart battery system specifications

allOf:
  - $ref: power-supply.yaml#

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - ti,bq20z45
              - ti,bq20z65
              - ti,bq20z75
          - enum:
              - sbs,sbs-battery
      - items:
          - const: sbs,sbs-battery

  reg:
    maxItems: 1

  sbs,i2c-retry-count:
    description:
      The number of times to retry I2C transactions on I2C IO failure.
    default: 0
    $ref: /schemas/types.yaml#/definitions/uint32

  sbs,poll-retry-count:
    description:
      The number of times to try looking for new status after an external
      change notification.
    default: 0
    $ref: /schemas/types.yaml#/definitions/uint32

  sbs,battery-detect-gpios:
    description:
      GPIO which signals battery detection. If this is not supplied, the bus
      needs to be polled to detect the battery.
    maxItems: 1

  sbs,disable-charger-broadcasts:
    description:
      SBS batteries by default send broadcast messages to SBS compliant chargers to
      configure max. charge current/voltage. If your hardware does not have an SBS
      compliant charger it should be disabled via this property to avoid blocking
      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
      master implementation.
    type: boolean

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        battery@b {
            compatible = "ti,bq20z75", "sbs,sbs-battery";
            reg = <0xb>;
            sbs,i2c-retry-count = <2>;
            sbs,poll-retry-count = <10>;
            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
            sbs,disable-charger-broadcasts;
       };
    };