# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,glink-rpm-edge.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm G-Link RPM edge

description: |
  Qualcomm G-Link edge, a FIFO based mechanism for communication with Resource
  Power Manager (RPM) on various Qualcomm platforms.

maintainers:
  - Bjorn Andersson <andersson@kernel.org>

properties:
  compatible:
    const: qcom,glink-rpm

  label:
    description:
      Name of the edge, used for debugging and identification purposes. The
      node name will be used if this is not present.

  interrupts:
    maxItems: 1

  mboxes:
    items:
      - description: rpm_hlos mailbox in APCS

  qcom,remote-pid:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      The identifier for the remote processor as known by the rest of the
      system.

  qcom,rpm-msg-ram:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: |
      RPM message memory resource (compatible: qcom,rpm-msg-ram).

  rpm-requests:
    type: object
    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
    unevaluatedProperties: false
    description:
      Qualcomm Resource Power Manager (RPM) over G-Link

    properties:
      qcom,intents:
        $ref: /schemas/types.yaml#/definitions/uint32-matrix
        minItems: 1
        maxItems: 32
        items:
          items:
            - description: size of each intent to preallocate
            - description: amount of intents to preallocate
              minimum: 1
        description:
          List of (size, amount) pairs describing what intents should be
          preallocated for this virtual channel. This can be used to tweak the
          default intents available for the channel to meet expectations of the
          remote.

    required:
      - qcom,glink-channels

required:
  - compatible
  - interrupts
  - mboxes

anyOf:
  - required:
      - qcom,remote-pid
  - required:
      - qcom,rpm-msg-ram

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
    glink-edge {
        compatible = "qcom,glink-rpm";
        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
        mboxes = <&apcs_glb 0>;
        qcom,rpm-msg-ram = <&rpm_msg_ram>;
 
        rpm-requests {
            compatible = "qcom,rpm-msm8996";
            qcom,glink-channels = "rpm_requests";
 
            /* ... */
        };
    };