Based on kernel version 6.19. Page generated on 2026-02-12 08:38 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 | # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2023-2025 Analog Devices Inc. # Copyright 2023 Kim Seer Paller # Copyright 2025 Marilene Andrade Garcia %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices MAX14001-MAX14002 ADC maintainers: - Kim Seer Paller <kimseer.paller@analog.com> - Marilene Andrade Garcia <marilene.agarcia@gmail.com> description: | Single channel 10 bit ADC with SPI interface. Datasheet can be found here https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: oneOf: - const: adi,max14002 - items: - const: adi,max14001 - const: adi,max14002 reg: maxItems: 1 spi-max-frequency: maximum: 5000000 vdd-supply: description: Isolated DC-DC power supply input voltage. vddl-supply: description: Logic power supply. refin-supply: description: ADC voltage reference supply. interrupts: minItems: 1 items: - description: | cout: comparator output signal that asserts high on the COUT pin when ADC readings exceed the upper threshold and low when readings fall below the lower threshold. - description: | fault: when fault reporting is enabled, the FAULT pin is asserted low whenever one of the monitored fault conditions occurs. interrupt-names: minItems: 1 items: - const: cout - const: fault required: - compatible - reg - vdd-supply - vddl-supply unevaluatedProperties: false examples: - | spi { #address-cells = <1>; #size-cells = <0>; adc@0 { compatible = "adi,max14001", "adi,max14002"; reg = <0>; spi-max-frequency = <5000000>; spi-lsb-first; vdd-supply = <&vdd>; vddl-supply = <&vddl>; }; }; ... |