Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST Microelectronics Nomadik I2C description: The Nomadik I2C host controller began its life in the ST Microelectronics STn8800 SoC, and was then inherited into STn8810 and STn8815. It was part of the prototype STn8500 which then became ST-Ericsson DB8500 after the merge of these two companies wireless divisions. maintainers: - Linus Walleij <linus.walleij@linaro.org> # Need a custom select here or 'arm,primecell' will match on lots of nodes select: properties: compatible: contains: enum: - st,nomadik-i2c - mobileye,eyeq5-i2c required: - compatible properties: compatible: oneOf: - items: - const: st,nomadik-i2c - const: arm,primecell - items: - const: stericsson,db8500-i2c - const: st,nomadik-i2c - const: arm,primecell - items: - const: mobileye,eyeq5-i2c - const: arm,primecell reg: maxItems: 1 interrupts: maxItems: 1 clocks: maxItems: 2 clock-names: oneOf: # Clock name in STn8815 - items: - const: mclk - const: apb_pclk # Clock name in DB8500 or EyeQ5 - items: - const: i2cclk - const: apb_pclk power-domains: maxItems: 1 resets: maxItems: 1 clock-frequency: minimum: 1 maximum: 400000 mobileye,olb: $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle to OLB system controller node. - description: Platform-wide controller ID (integer starting from zero). description: The phandle pointing to OLB system controller node, with the I2C controller index. required: - compatible - reg - interrupts - clocks - clock-names unevaluatedProperties: false allOf: - $ref: /schemas/i2c/i2c-controller.yaml# - if: properties: compatible: contains: const: mobileye,eyeq5-i2c then: required: - mobileye,olb else: properties: mobileye,olb: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h> #include <dt-bindings/arm/ux500_pm_domains.h> i2c@80004000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <400000>; clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>; }; i2c@101f8000 { compatible = "st,nomadik-i2c", "arm,primecell"; reg = <0x101f8000 0x1000>; interrupt-parent = <&vica>; interrupts = <20>; clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; clocks = <&i2c0clk>, <&pclki2c0>; clock-names = "mclk", "apb_pclk"; }; - | #include <dt-bindings/interrupt-controller/mips-gic.h> i2c@300000 { compatible = "mobileye,eyeq5-i2c", "arm,primecell"; reg = <0x300000 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; clocks = <&i2c_ser_clk>, <&i2c_clk>; clock-names = "i2cclk", "apb_pclk"; mobileye,olb = <&olb 0>; }; ... |