Documentation / devicetree / bindings / display / solomon,ssd-common.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Common properties for Solomon OLED Display Controllers

maintainers:
  - Javier Martinez Canillas <javierm@redhat.com>

properties:
  reg:
    maxItems: 1

  reset-gpios:
    maxItems: 1
 
  # Only required for SPI
  dc-gpios:
    description:
      GPIO connected to the controller's D/C# (Data/Command) pin,
      that is needed for 4-wire SPI to tell the controller if the
      data sent is for a command register or the display data RAM
    maxItems: 1

  solomon,height:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Height in pixel of the screen driven by the controller.
      The default value is controller-dependent.

  solomon,width:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Width in pixel of the screen driven by the controller.
      The default value is controller-dependent.

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#

additionalProperties: true