Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 | # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A31 MIPI-DSI Controller maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> properties: compatible: oneOf: - enum: - allwinner,sun6i-a31-mipi-dsi - allwinner,sun50i-a64-mipi-dsi - allwinner,sun50i-a100-mipi-dsi - items: - const: allwinner,sun20i-d1-mipi-dsi - const: allwinner,sun50i-a100-mipi-dsi reg: maxItems: 1 interrupts: maxItems: 1 clocks: minItems: 1 items: - description: Bus Clock - description: Module Clock clock-names: items: - const: bus - const: mod resets: maxItems: 1 vcc-dsi-supply: description: VCC-DSI power supply of the DSI encoder phys: maxItems: 1 phy-names: const: dphy port: $ref: /schemas/graph.yaml#/properties/port description: The port should be the input endpoint, usually coming from the associated TCON. required: - compatible - reg - interrupts - clocks - phys - phy-names - resets - port allOf: - $ref: dsi-controller.yaml# - if: properties: compatible: contains: enum: - allwinner,sun6i-a31-mipi-dsi - allwinner,sun50i-a100-mipi-dsi then: properties: clocks: minItems: 2 required: - clock-names else: properties: clocks: maxItems: 1 - if: properties: compatible: contains: enum: - allwinner,sun6i-a31-mipi-dsi - allwinner,sun50i-a64-mipi-dsi then: required: - vcc-dsi-supply unevaluatedProperties: false examples: - | dsi0: dsi@1ca0000 { compatible = "allwinner,sun6i-a31-mipi-dsi"; reg = <0x01ca0000 0x1000>; interrupts = <0 89 4>; clocks = <&ccu 23>, <&ccu 96>; clock-names = "bus", "mod"; resets = <&ccu 4>; phys = <&dphy0>; phy-names = "dphy"; vcc-dsi-supply = <®_dcdc1>; #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; reg = <0>; power-supply = <®_display>; reset-gpios = <&r_pio 0 5 1>; /* PL05 */ backlight = <&pwm_bl>; }; port { dsi0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_dsi0>; }; }; }; ... |