Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Goodix Berlin series touchscreen controller description: The Goodix Berlin series of touchscreen controllers be connected to either I2C or SPI buses. maintainers: - Neil Armstrong <neil.armstrong@linaro.org> allOf: - $ref: touchscreen.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: enum: - goodix,gt9916 reg: maxItems: 1 interrupts: maxItems: 1 reset-gpios: maxItems: 1 avdd-supply: description: Analog power supply regulator on AVDD pin vddio-supply: description: power supply regulator on VDDIO pin spi-max-frequency: true touchscreen-inverted-x: true touchscreen-inverted-y: true touchscreen-size-x: true touchscreen-size-y: true touchscreen-swapped-x-y: true additionalProperties: false required: - compatible - reg - interrupts - avdd-supply - touchscreen-size-x - touchscreen-size-y examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; touchscreen@5d { compatible = "goodix,gt9916"; reg = <0x5d>; interrupt-parent = <&gpio>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; avdd-supply = <&ts_avdd>; touchscreen-size-x = <1024>; touchscreen-size-y = <768>; }; }; - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; num-cs = <1>; cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; touchscreen@0 { compatible = "goodix,gt9916"; reg = <0>; interrupt-parent = <&gpio>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; avdd-supply = <&ts_avdd>; spi-max-frequency = <1000000>; touchscreen-size-x = <1024>; touchscreen-size-y = <768>; }; }; ... |