# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Glymur Display MDSS

maintainers:
  - Abel Vesa <abel.vesa@linaro.org>

description:
  Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
  DPU display controller, DP interfaces, etc.

$ref: /schemas/display/msm/mdss-common.yaml#

properties:
  compatible:
    const: qcom,glymur-mdss

  clocks:
    items:
      - description: Display AHB
      - description: Display hf AXI
      - description: Display core

  iommus:
    maxItems: 1

  interconnects:
    items:
      - description: Interconnect path from mdp0 port to the data bus
      - description: Interconnect path from CPU to the reg bus

  interconnect-names:
    items:
      - const: mdp0-mem
      - const: cpu-cfg

patternProperties:
  "^display-controller@[0-9a-f]+$":
    type: object
    additionalProperties: true
    properties:
      compatible:
        const: qcom,glymur-dpu
 
  "^displayport-controller@[0-9a-f]+$":
    type: object
    additionalProperties: true
    properties:
      compatible:
        const: qcom,glymur-dp
 
  "^phy@[0-9a-f]+$":
    type: object
    additionalProperties: true
    properties:
      compatible:
        const: qcom,glymur-dp-phy

required:
  - compatible

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,rpmh.h>
    #include <dt-bindings/interconnect/qcom,icc.h>
    #include <dt-bindings/interconnect/qcom,glymur-rpmh.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/phy/phy-qcom-qmp.h>
    #include <dt-bindings/power/qcom,rpmhpd.h>
 
    display-subsystem@ae00000 {
            compatible = "qcom,glymur-mdss";
            reg = <0x0ae00000 0x1000>;
            reg-names = "mdss";
 
            interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 
            clocks = <&dispcc_ahb_clk>,
                     <&gcc_disp_hf_axi_clk>,
                     <&dispcc_mdp_clk>;
            clock-names = "bus", "nrt_bus", "core";
 
            interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
                            <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
                             &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
            interconnect-names = "mdp0-mem",
                                 "cpu-cfg";
 
            resets = <&disp_cc_mdss_core_bcr>;
 
            power-domains = <&mdss_gdsc>;
 
            iommus = <&apps_smmu 0x1c00 0x2>;
 
            interrupt-controller;
            #interrupt-cells = <1>;
 
            #address-cells = <1>;
            #size-cells = <1>;
            ranges;
 
            display-controller@ae01000 {
                compatible = "qcom,glymur-dpu";
                reg = <0x0ae01000 0x8f000>,
                      <0x0aeb0000 0x2008>;
                reg-names = "mdp", "vbif";
 
                clocks = <&gcc_axi_clk>,
                         <&dispcc_ahb_clk>,
                         <&dispcc_mdp_lut_clk>,
                         <&dispcc_mdp_clk>,
                         <&dispcc_mdp_vsync_clk>;
                clock-names = "nrt_bus",
                              "iface",
                              "lut",
                              "core",
                              "vsync";
 
                assigned-clocks = <&dispcc_mdp_vsync_clk>;
                assigned-clock-rates = <19200000>;
 
                operating-points-v2 = <&mdp_opp_table>;
                power-domains = <&rpmhpd RPMHPD_MMCX>;
 
                interrupt-parent = <&mdss>;
                interrupts = <0>;
 
                ports {
                    #address-cells = <1>;
                    #size-cells = <0>;
 
                    port@0 {
                        reg = <0>;
                        dpu_intf1_out: endpoint {
                            remote-endpoint = <&dsi0_in>;
                        };
                    };
 
                    port@1 {
                        reg = <1>;
                        dpu_intf2_out: endpoint {
                            remote-endpoint = <&dsi1_in>;
                        };
                    };
                };
 
                mdp_opp_table: opp-table {
                    compatible = "operating-points-v2";
 
                    opp-200000000 {
                        opp-hz = /bits/ 64 <200000000>;
                        required-opps = <&rpmhpd_opp_low_svs>;
                    };
 
                    opp-325000000 {
                        opp-hz = /bits/ 64 <325000000>;
                        required-opps = <&rpmhpd_opp_svs>;
                    };
 
                    opp-375000000 {
                        opp-hz = /bits/ 64 <375000000>;
                        required-opps = <&rpmhpd_opp_svs_l1>;
                    };
 
                    opp-514000000 {
                        opp-hz = /bits/ 64 <514000000>;
                        required-opps = <&rpmhpd_opp_nom>;
                    };
                };
            };
 
            displayport-controller@ae90000 {
                compatible = "qcom,glymur-dp";
                reg = <0xae90000 0x200>,
                      <0xae90200 0x200>,
                      <0xae90400 0x600>,
                      <0xae91000 0x400>,
                      <0xae91400 0x400>;
 
                interrupt-parent = <&mdss>;
                interrupts = <12>;
 
                clocks = <&dispcc_mdss_ahb_clk>,
                         <&dispcc_dptx0_aux_clk>,
                         <&dispcc_dptx0_link_clk>,
                         <&dispcc_dptx0_link_intf_clk>,
                         <&dispcc_dptx0_pixel0_clk>,
                         <&dispcc_dptx0_pixel1_clk>;
                clock-names = "core_iface",
                              "core_aux",
                              "ctrl_link",
                              "ctrl_link_iface",
                              "stream_pixel",
                              "stream_1_pixel";
 
                assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
                                  <&dispcc_mdss_dptx0_pixel0_clk_src>,
                                  <&dispcc_mdss_dptx0_pixel1_clk_src>;
                assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
                operating-points-v2 = <&mdss_dp0_opp_table>;
 
                power-domains = <&rpmhpd RPMHPD_MMCX>;
 
                phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
                phy-names = "dp";
 
                #sound-dai-cells = <0>;
 
                ports {
                    #address-cells = <1>;
                    #size-cells = <0>;
 
                    port@0 {
                        reg = <0>;
 
                        mdss_dp0_in: endpoint {
                          remote-endpoint = <&mdss_intf0_out>;
                        };
                    };
 
                    port@1 {
                        reg = <1>;
 
                        mdss_dp0_out: endpoint {
                        };
                    };
                };
 
                mdss_dp0_opp_table: opp-table {
                    compatible = "operating-points-v2";
 
                    opp-160000000 {
                        opp-hz = /bits/ 64 <160000000>;
                        required-opps = <&rpmhpd_opp_low_svs>;
                    };
 
                    opp-270000000 {
                        opp-hz = /bits/ 64 <270000000>;
                        required-opps = <&rpmhpd_opp_svs>;
                    };
 
                    opp-540000000 {
                        opp-hz = /bits/ 64 <540000000>;
                        required-opps = <&rpmhpd_opp_svs_l1>;
                    };
 
                    opp-810000000 {
                        opp-hz = /bits/ 64 <810000000>;
                        required-opps = <&rpmhpd_opp_nom>;
                    };
                };
            };
        };
...