# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Renesas RZ/G2L MIPI DSI Encoder

maintainers:
  - Biju Das <biju.das.jz@bp.renesas.com>

description: |
  This binding describes the MIPI DSI encoder embedded in the Renesas
  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
  up to four data lanes.

allOf:
  - $ref: /schemas/display/dsi-controller.yaml#

properties:
  compatible:
    items:
      - enum:
          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
          - renesas,r9a07g054-mipi-dsi # RZ/V2L
      - const: renesas,rzg2l-mipi-dsi

  reg:
    maxItems: 1

  interrupts:
    items:
      - description: Sequence operation channel 0 interrupt
      - description: Sequence operation channel 1 interrupt
      - description: Video-Input operation channel 1 interrupt
      - description: DSI Packet Receive interrupt
      - description: DSI Fatal Error interrupt
      - description: DSI D-PHY PPI interrupt
      - description: Debug interrupt

  interrupt-names:
    items:
      - const: seq0
      - const: seq1
      - const: vin1
      - const: rcv
      - const: ferr
      - const: ppi
      - const: debug

  clocks:
    items:
      - description: DSI D-PHY PLL multiplied clock
      - description: DSI D-PHY system clock
      - description: DSI AXI bus clock
      - description: DSI Register access clock
      - description: DSI Video clock
      - description: DSI D-PHY Escape mode transmit clock

  clock-names:
    items:
      - const: pllclk
      - const: sysclk
      - const: aclk
      - const: pclk
      - const: vclk
      - const: lpclk

  resets:
    items:
      - description: MIPI_DSI_CMN_RSTB
      - description: MIPI_DSI_ARESET_N
      - description: MIPI_DSI_PRESET_N

  reset-names:
    items:
      - const: rst
      - const: arst
      - const: prst

  power-domains:
    maxItems: 1

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: Parallel input port

      port@1:
        $ref: /schemas/graph.yaml#/$defs/port-base
        unevaluatedProperties: false
        description: DSI output port

        properties:
          endpoint:
            $ref: /schemas/media/video-interfaces.yaml#
            unevaluatedProperties: false

            properties:
              data-lanes:
                description: array of physical DSI data lane indexes.
                minItems: 1
                items:
                  - const: 1
                  - const: 2
                  - const: 3
                  - const: 4

            required:
              - data-lanes

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - interrupts
  - interrupt-names
  - clocks
  - clock-names
  - resets
  - reset-names
  - power-domains
  - ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/r9a07g044-cpg.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
    dsi0: dsi@10850000 {
        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
        reg = <0x10850000 0x20000>;
        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-names = "seq0", "seq1", "vin1", "rcv",
                          "ferr", "ppi", "debug";
        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
        reset-names = "rst", "arst", "prst";
        power-domains = <&cpg>;
 
        ports {
            #address-cells = <1>;
            #size-cells = <0>;
 
            port@0 {
                reg = <0>;
                dsi0_in: endpoint {
                    remote-endpoint = <&du_out_dsi0>;
                };
            };
 
            port@1 {
                reg = <1>;
                dsi0_out: endpoint {
                    data-lanes = <1 2 3 4>;
                    remote-endpoint = <&adv7535_in>;
                };
            };
        };
    };
...