Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Monolithic Power System MPQ7920 PMIC maintainers: - Saravanan Sekar <sravanhome@gmail.com> properties: $nodename: pattern: "pmic@[0-9a-f]{1,2}" compatible: enum: - mps,mpq7920 reg: maxItems: 1 regulators: type: object description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] properties: mps,switch-freq: $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz ldortc: type: object $ref: regulator.yaml# unevaluatedProperties: false patternProperties: "^ldo[1-4]$": type: object $ref: regulator.yaml# unevaluatedProperties: false "^buck[1-4]$": type: object $ref: regulator.yaml# properties: mps,buck-softstart: $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270deg mps,buck-ovp-disable: type: boolean description: | disables over voltage protection of this buck unevaluatedProperties: false additionalProperties: false required: - compatible - reg - regulators additionalProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; pmic@69 { compatible = "mps,mpq7920"; reg = <0x69>; regulators { mps,switch-freq = /bits/ 8 <1>; buck1 { regulator-name = "buck1"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <3587500>; regulator-min-microamp = <460000>; regulator-max-microamp = <7600000>; regulator-boot-on; mps,buck-ovp-disable; mps,buck-phase-delay = /bits/ 8 <2>; mps,buck-softstart = /bits/ 8 <1>; }; ldo2 { regulator-name = "ldo2"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <3587500>; }; }; }; }; ... |