Based on kernel version 7.3. Page generated on 2026-10-19 13:17 EDT.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/lltc,ltc3589.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology LTC3589 PMIC maintainers: - Frank Li <Frank.li@kernel.org> description: Linear Technology LTC3589, LTC3589-1 and LTC3589-2 are PMICs containing three buck regulators, one boost regulator and four LDO regulators. properties: compatible: enum: - lltc,ltc3589 - lltc,ltc3589-1 - lltc,ltc3589-2 reg: maxItems: 1 interrupts: maxItems: 1 regulators: type: object additionalProperties: false patternProperties: "^(sw1|sw2|sw3|bb-out|ldo1|ldo2)$": type: object unevaluatedProperties: false $ref: regulator.yaml# properties: lltc,fb-voltage-divider: description: Feedback voltage divider resistor values (R1, R2) in ohms. Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from 0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between 0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1 have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not be disabled and thus should have the regulator-always-on property set. $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: R1 in ohms - description: R2 in ohms. required: - lltc,fb-voltage-divider "^(ldo3|ldo4)$": type: object unevaluatedProperties: false $ref: regulator.yaml# required: - compatible - reg - regulators additionalProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; pmic@34 { compatible = "lltc,ltc3589-1"; reg = <0x34>; regulators { sw1 { regulator-min-microvolt = <591930>; regulator-max-microvolt = <1224671>; lltc,fb-voltage-divider = <100000 158000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; sw2 { regulator-min-microvolt = <704123>; regulator-max-microvolt = <1456803>; lltc,fb-voltage-divider = <180000 191000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; sw3 { regulator-min-microvolt = <1341250>; regulator-max-microvolt = <2775000>; lltc,fb-voltage-divider = <270000 100000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; bb-out { regulator-min-microvolt = <3387341>; regulator-max-microvolt = <3387341>; lltc,fb-voltage-divider = <511000 158000>; regulator-boot-on; regulator-always-on; }; ldo1 { regulator-min-microvolt = <1306329>; regulator-max-microvolt = <1306329>; lltc,fb-voltage-divider = <100000 158000>; regulator-boot-on; regulator-always-on; }; ldo2 { regulator-min-microvolt = <704123>; regulator-max-microvolt = <1456806>; lltc,fb-voltage-divider = <180000 191000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; ldo3 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-boot-on; }; ldo4 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3200000>; }; }; }; }; |