Based on kernel version 6.18. Page generated on 2025-12-02 09:03 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/nxp,pf0900.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP PF0900 Power Management Integrated Circuit regulators maintainers: - Joy Zou <joy.zou@nxp.com> description: The PF0900 is a power management integrated circuit (PMIC) optimized for high performance i.MX9x based applications. It features five high efficiency buck converters, three linear and one vaon regulators. It provides low quiescent current in Standby and low power off Modes. properties: compatible: enum: - nxp,pf0900 reg: maxItems: 1 interrupts: maxItems: 1 regulators: type: object additionalProperties: false properties: vaon: type: object $ref: regulator.yaml# unevaluatedProperties: false patternProperties: "^ldo[1-3]$": type: object $ref: regulator.yaml# unevaluatedProperties: false "^sw[1-5]$": type: object $ref: regulator.yaml# unevaluatedProperties: false nxp,i2c-crc-enable: type: boolean description: The CRC enabled during register read/write. Controlled by customer unviewable fuse bits OTP_I2C_CRC_EN. Check chip part number. required: - compatible - reg - interrupts - regulators additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; pmic@8 { compatible = "nxp,pf0900"; reg = <0x08>; interrupt-parent = <&pcal6524>; interrupts = <89 IRQ_TYPE_LEVEL_LOW>; nxp,i2c-crc-enable; regulators { vaon { regulator-name = "VAON"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sw1 { regulator-name = "SW1"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1950>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-max-microvolt = <650000>; regulator-suspend-min-microvolt = <650000>; }; }; sw2 { regulator-name = "SW2"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1950>; }; sw3 { regulator-name = "SW3"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1950>; }; sw4 { regulator-name = "SW4"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1950>; }; sw5 { regulator-name = "SW5"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1950>; }; ldo1 { regulator-name = "LDO1"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; ldo2 { regulator-name = "LDO2"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; ldo3 { regulator-name = "LDO3"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; }; }; |